DA82-01415A Samsung Water Leakage Service Kit
LG Sears Kenmore Refrigerator Excessive Frost Water Leakage Service Kit DA82-01415A
Weight : 0.7841 lbs
Dimension : 10.7874 x 4.8425 x 2.0866
LG Sears Kenmore Refrigerator Excessive Frost Water Leakage Service Kit DA82-01415A
Weight : 0.7841 lbs
Dimension : 10.7874 x 4.8425 x 2.0866
Write Your Own Review
Step-by-Step Guide to Replacing the DA82-01415A Samsung Water Leakage Service Kit
1. Turn off the water valve that supplies water to the Samsung appliance.
2. Unplug the appliance from the wall socket and turn off the breaker switch.
3. Remove the access panels on the back of the appliance to expose the internal components.
4. Locate the water leakage service kit components, including the inlet hose, inlet valve, drain hose, and float switch.
5. Disconnect the inlet hose and drain hose from the appliance.
6. Remove the old inlet valve and float switch from the appliance.
7. Install the new inlet valve and float switch onto the appliance.
8. Connect the new inlet hose and drain hose to the appliance.
9. Replace the access panels on the back of the appliance.
10. Plug the appliance back into the wall socket and turn on the breaker switch.
11. Turn on the water valve that supplies water to the Samsung appliance.
12. Test the water leakage service kit components for proper operation.
Follow these steps to easily replace the DA82-01415A Samsung Water Leakage Service Kit with minimal hassle!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Turn off the water valve that supplies water to the Samsung appliance.
2. Unplug the appliance from the wall socket and turn off the breaker switch.
3. Remove the access panels on the back of the appliance to expose the internal components.
4. Locate the water leakage service kit components, including the inlet hose, inlet valve, drain hose, and float switch.
5. Disconnect the inlet hose and drain hose from the appliance.
6. Remove the old inlet valve and float switch from the appliance.
7. Install the new inlet valve and float switch onto the appliance.
8. Connect the new inlet hose and drain hose to the appliance.
9. Replace the access panels on the back of the appliance.
10. Plug the appliance back into the wall socket and turn on the breaker switch.
11. Turn on the water valve that supplies water to the Samsung appliance.
12. Test the water leakage service kit components for proper operation.
Follow these steps to easily replace the DA82-01415A Samsung Water Leakage Service Kit with minimal hassle!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
