DA47-00244B Samsung Defrost Heater Assembly
Refrigerator metal sheath defrost heater assembly for some models of Samsung fridges.
Weight : 0.2455 lbs
Dimension : 10.748 x 10.0787 x 0.315
Refrigerator metal sheath defrost heater assembly for some models of Samsung fridges.
Weight : 0.2455 lbs
Dimension : 10.748 x 10.0787 x 0.315
Write Your Own Review
SAMSUNG DEFROST HEATER ASSEMBLY REPLACEMENT DIY INSTRUCTIONS
Replacing the DA47-00244B Samsung Defrost Heater Assembly is not a difficult task. With the proper tools and some knowledge of appliance repairs, it can be completed quickly and easily. Here is a simple step-by-step guide that will help you successfully replace the Defrost Heater Assembly.
Tools Needed:
• ¼†Nut Driver
• 5/16†Nut Driver
• Phillips Head Screwdriver
• DA47-00244B Defrost Heater Assembly
Step 1: Unplug the refrigerator from the wall outlet.
Step 2: Remove the lower back panel of the refrigerator by unscrewing the screws on each side of the panel with the ¼†nut driver.
Step 3: Remove the old Defrost Heater Assembly by disconnecting the electrical connections. Disconnecting the connections can be done by releasing the locking tabs on either side and sliding the wires off the terminals.
Step 4: Install the new DA47-00244B Defrost Heater Assembly. Connect the two electrical connections to the new heater assembly by placing the wires onto the terminals and pressing down on the locking tab to secure the connection.
Step 5: Secure the new Defrost Heater Assembly in place by using the 5/16†nut driver to the screws on each side.
Step 6: Replace the lower back panel by using the Phillips head screwdriver to reattach the screws on each side.
Step 7: Plug the refrigerator back into the wall outlet.
Congratulations! You have successfully replaced your DA47-00244B Defrost Heater Assembly. We hope that this guide was helpful and that you were able to complete the job safely.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the DA47-00244B Samsung Defrost Heater Assembly is not a difficult task. With the proper tools and some knowledge of appliance repairs, it can be completed quickly and easily. Here is a simple step-by-step guide that will help you successfully replace the Defrost Heater Assembly.
Tools Needed:
• ¼†Nut Driver
• 5/16†Nut Driver
• Phillips Head Screwdriver
• DA47-00244B Defrost Heater Assembly
Step 1: Unplug the refrigerator from the wall outlet.
Step 2: Remove the lower back panel of the refrigerator by unscrewing the screws on each side of the panel with the ¼†nut driver.
Step 3: Remove the old Defrost Heater Assembly by disconnecting the electrical connections. Disconnecting the connections can be done by releasing the locking tabs on either side and sliding the wires off the terminals.
Step 4: Install the new DA47-00244B Defrost Heater Assembly. Connect the two electrical connections to the new heater assembly by placing the wires onto the terminals and pressing down on the locking tab to secure the connection.
Step 5: Secure the new Defrost Heater Assembly in place by using the 5/16†nut driver to the screws on each side.
Step 6: Replace the lower back panel by using the Phillips head screwdriver to reattach the screws on each side.
Step 7: Plug the refrigerator back into the wall outlet.
Congratulations! You have successfully replaced your DA47-00244B Defrost Heater Assembly. We hope that this guide was helpful and that you were able to complete the job safely.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
