PA Categories

This Dishwasher Mounting Bracket is used to mount the dishwasher to the underside of the counter where your dishwasher is installed. The old bracket is held in by metal tabs i ...n the rail. These tabs will need to be carefully bent up with pliers in order to remove the old bracket, and then bent down again after replacing the new mounting bracket. This bracket comes with extra mounting holes that may need to be adjusted depending on where your dishwasher sits under the counter after being pushed back in. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the water supply under the sink. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) once a month or as needed, to help remove limescale and mineral buildup that can affect your dishwasher's performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Mounting Bracket• Tools Needed: Multi screwdriver, needle-nose pliers Read More Read Less

Maytag Whirlpool Magic Chef KitchenAid Roper Norge Sears Kenmore Admiral Amana Clothes Dryer THERMISTOR 35001191We are a Factory Authorized Parts Distributor for Whirlpool May ...tag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs. Read More Read Less

This Refrigerator Temperature Sensor senses the temperature inside the refrigerator and sends information to the electronic control so temperature stays regulated. If your app ...liance's temperature isn't consistent, replacing the sensor may alleviate this issue. To access this part, open the refrigerator door and locate the thermistor cover on the side wall of your appliance. Remove all shelves from the refrigerator and then remove the thermistor from the cover. Using side cutters, cut the thermistor wires at the base of the thermistor and discard the old part. You'll then pull the wires apart in the new thermistor and insert them into the old IDC splice connector. We strongly recommend that you hire a qualified technician to safely install this part. Replacing this part will require advanced mechanical training. Specialized tools, complex testing and appliance calibration may be required.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Temperature Sensor• Tools Needed: Specialized Tools Read More Read Less

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

LG Electronics Sears Kenmore Clothes Washer And Dryer Pedestal LEG SUPPORTER GUIDE BRACKET MJH40343901

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM item made by Samsung

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

The Anti Tip Bracket is designed to safely secure select ranges to the floor. The anti-tip bracket provides extra protection when excess force is applied to an open oven door. ... Screws are sold separately. To order the screws, use (item WP7101P485-60, includes two screws). Installing this part will require basic hand tools, some disassembly of the range and novice repair experience. Remember to unplug the range or shut off the house circuit breaker for the appliance before installing this item.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Anti-Tip Kit• Tools Needed: Phillips-Head screwdriver Read More Read Less