8330331653200 Panasonic Refrigerator Door Gasket
Part #: SAN 8330331653200
NOTE: When ordering parts from the website, please verify your part number is correct for your model before ordering. Parts may look the same but the size and shape can have small variations.
Weight : 0.000000 lbs
NOTE: When ordering parts from the website, please verify your part number is correct for your model before ordering. Parts may look the same but the size and shape can have small variations.
Weight : 0.000000 lbs
Write Your Own Review
1. Prepare your work area by gathering all necessary tools and supplies needed to replace the 8330331653200 Refrigerator Door Gasket. You will need a pair of heavy duty gloves, a Phillips head screwdriver, a flathead screwdriver, and a replacement gasket of the same size and model.
2. Make sure that your refrigerator is unplugged and cooled down before beginning.
3. Put on your heavy duty gloves and use the Phillips head screwdriver to remove the screws securing the old gasket around the door.
4. Carefully remove the old gasket from the refrigerator door, taking care not to damage the door itself.
5. Place the new gasket in the same place as the old gasket, making sure that the notches line up with the corresponding notches on the door.
6. Secure the new gasket to the door using the Phillips head screwdriver to drive in the screws.
7. Test the new gasket for a proper seal by closing the door and checking that air does not escape from any gaps between the gasket and the door.
8. Plug in the refrigerator and turn it on. Your new gasket should now be installed and ready for use!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Make sure that your refrigerator is unplugged and cooled down before beginning.
3. Put on your heavy duty gloves and use the Phillips head screwdriver to remove the screws securing the old gasket around the door.
4. Carefully remove the old gasket from the refrigerator door, taking care not to damage the door itself.
5. Place the new gasket in the same place as the old gasket, making sure that the notches line up with the corresponding notches on the door.
6. Secure the new gasket to the door using the Phillips head screwdriver to drive in the screws.
7. Test the new gasket for a proper seal by closing the door and checking that air does not escape from any gaps between the gasket and the door.
8. Plug in the refrigerator and turn it on. Your new gasket should now be installed and ready for use!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
