FF7.5HBK1 Packard Compressor R-134a, 630 BTU, 115V/60Hz
Part #: PAC FF7.5HBK1
- Direct replacement compressors for Whirlpool, GE and Electrolux appliances
- Replacement compressors for food service equipment, vending machines, bottle coolers, ice machines and other refrigeration equipment
- Additional mounting configurations on base plate.
Compatible Replacement For
- Copeland ARB13C3E-SAA Tecumseh AEA1360YXA Tecumseh AEA3425YXA Embraco FF6HBK Embraco FF7.5HBK Sub Zero 7002345 Sub Zero 7010135 Sub Zero 7013091 Sub Zero 7018944
Weight : 7.132000 lbs
Dimension : 12.874000 x 8.503900 x 9.055100
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
- Direct replacement compressors for Whirlpool, GE and Electrolux appliances
- Replacement compressors for food service equipment, vending machines, bottle coolers, ice machines and other refrigeration equipment
- Additional mounting configurations on base plate.
Compatible Replacement For
- Copeland ARB13C3E-SAA Tecumseh AEA1360YXA Tecumseh AEA3425YXA Embraco FF6HBK Embraco FF7.5HBK Sub Zero 7002345 Sub Zero 7010135 Sub Zero 7013091 Sub Zero 7018944
Weight : 7.132000 lbs
Dimension : 12.874000 x 8.503900 x 9.055100
Write Your Own Review
The following parts are replaced by this product
- 4387474
- 4201860
- 7002345
- 7018944
- 7013091
- 7010135
1. Shutdown the power to the refrigerator.
2. Cut the power to the compressor by unplugging the electrical connections or switching off the breaker.
3. Release all pressure in the system with a fitting cap.
4. Drain any excess oil from the old compressor.
5. Carefully remove the old compressor and the mounting bracket.
6. Apply a blanket of mineral oil to the new Packard FF7.5HBK1 Compressor before installing.
7. Install the new Packard compressor using the mounting bracket and bolts.
8. Connect the electrical components properly and ensure that all connections are secure.
9. Attach the refrigerant lines to the compressor and secure them with clamps.
10. Evacuate the refrigerant system according to your system’s instructions.
11. Charge the system with fresh refrigerant and check for any leaks.
12. Turn on the power to the refrigerator and check if the compressor is running properly.
13. Monitor the system for proper performance and make adjustments as necessary.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Cut the power to the compressor by unplugging the electrical connections or switching off the breaker.
3. Release all pressure in the system with a fitting cap.
4. Drain any excess oil from the old compressor.
5. Carefully remove the old compressor and the mounting bracket.
6. Apply a blanket of mineral oil to the new Packard FF7.5HBK1 Compressor before installing.
7. Install the new Packard compressor using the mounting bracket and bolts.
8. Connect the electrical components properly and ensure that all connections are secure.
9. Attach the refrigerant lines to the compressor and secure them with clamps.
10. Evacuate the refrigerant system according to your system’s instructions.
11. Charge the system with fresh refrigerant and check for any leaks.
12. Turn on the power to the refrigerator and check if the compressor is running properly.
13. Monitor the system for proper performance and make adjustments as necessary.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
