66071 Packard Blower Draft Inducer, 2.8A, 120V, 3000 RPM, Goodman Replacement
Part #: PAC 66071
- OEM Direct Replacement - Draft Inducer Blower
- C-Frame
- Shaded Pole
- Thermally Protected
- Open Air Over
- Class B Insulation, 40°C Ambient
- Ball Bearing
- 12.5-11.5" Leads with White Lead Female Terminal and Black Lead Male Terminal
Compatible Replacement For
- Fasco 70582108 AllTemp FB-RFB501 Goodman 017100000S Goodman 0171M00000 Goodman 0171M00000S Goodman 0171M00001S Goodman 22307501 Rotom FB-RFB501
Weight : 5.607000 lbs
Dimension : 9.960000 x 9.960000 x 7.800000
- OEM Direct Replacement - Draft Inducer Blower
- C-Frame
- Shaded Pole
- Thermally Protected
- Open Air Over
- Class B Insulation, 40°C Ambient
- Ball Bearing
- 12.5-11.5" Leads with White Lead Female Terminal and Black Lead Male Terminal
Compatible Replacement For
- Fasco 70582108 AllTemp FB-RFB501 Goodman 017100000S Goodman 0171M00000 Goodman 0171M00000S Goodman 0171M00001S Goodman 22307501 Rotom FB-RFB501
Weight : 5.607000 lbs
Dimension : 9.960000 x 9.960000 x 7.800000
Write Your Own Review
DIY Guide to Replacing the Packard 66071 GOODMAN INDUCER 0171M00000S
If you’re looking to replace your Goodman inducer, then you’ve come to the right place. This guide will provide you with step-by-step instructions for replacing the Packard 66071 GOODMAN INDUCER 0171M00000S. With just a few basic tools and a bit of patience, you can have your new inducer up and running in no time. So let’s get started!
1. First, make sure the power is turned off at the service panel. This is an important safety precaution and should always be done prior to working on any electrical component.
2. Once the power is shut off, locate the existing inducer and remove it from the furnace.
3. Unscrew the mounting nuts and take off the housing.
4. Disconnect the wiring harness from the inducer and remove it from the unit.
5. Take the old inducer and prepare it for disposal.
6. Now, take the new inducer and connect it to the wiring harness. Make sure all of the connections are secure.
7. Place the inducer in the housing and secure it with the mounting nuts.
8. Turn the power back on at the service panel.
9. Test the inducer to ensure that it is functioning properly.
10. You’re all done!
Congratulations on successfully replacing the Packard 66071 GOODMAN INDUCER 0171M00000S. You should now be able to enjoy the comfort and efficiency of your newly replaced Goodman inducer.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If you’re looking to replace your Goodman inducer, then you’ve come to the right place. This guide will provide you with step-by-step instructions for replacing the Packard 66071 GOODMAN INDUCER 0171M00000S. With just a few basic tools and a bit of patience, you can have your new inducer up and running in no time. So let’s get started!
1. First, make sure the power is turned off at the service panel. This is an important safety precaution and should always be done prior to working on any electrical component.
2. Once the power is shut off, locate the existing inducer and remove it from the furnace.
3. Unscrew the mounting nuts and take off the housing.
4. Disconnect the wiring harness from the inducer and remove it from the unit.
5. Take the old inducer and prepare it for disposal.
6. Now, take the new inducer and connect it to the wiring harness. Make sure all of the connections are secure.
7. Place the inducer in the housing and secure it with the mounting nuts.
8. Turn the power back on at the service panel.
9. Test the inducer to ensure that it is functioning properly.
10. You’re all done!
Congratulations on successfully replacing the Packard 66071 GOODMAN INDUCER 0171M00000S. You should now be able to enjoy the comfort and efficiency of your newly replaced Goodman inducer.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
