MCR65017001 LG Refrigerator Shelf Trim Decor Cover Assembly
Front shelf trim fits some model of LG refrigerators.
Decor cover assembly.
Decor cover assembly.
Weight : 1.986 lbs
Dimension : 24.1338 x 4.8425 x 2.3622
Front shelf trim fits some model of LG refrigerators.
Decor cover assembly.
Decor cover assembly.
Weight : 1.986 lbs
Dimension : 24.1338 x 4.8425 x 2.3622
Write Your Own Review
DIY Guide to Replacing the MCR65017001 LG Refrigerator Shelf Trim, Decor Cover Assembly
Having an old or broken shelf trim, decor cover assembly on your LG refrigerator can be a cause of annoyance. But replacing your MCR65017001 LG refrigerator shelf trim, decor cover assembly doesn’t have to be complicated. With some basic knowledge and tools you can replace your shelf trim, decor cover assembly in no time.
Tools Needed:
•Phillips head screwdriver
•Towel
Instructions:
1. Unplug your refrigerator. Because you will be removing parts of the refrigerator, it is safest to unplug the appliance before opening it.
2. Remove the shelves. You will find them attached to the side of the refrigerator, behind the door. Using a Phillips head screwdriver, remove the screws from the shelf brackets. Once the screws are out, pull the shelves away from the wall and set aside.
3. Remove the shelf trim. Next, find the shelf trim. It should be located underneath the top shelf. Gently pull out the shelf trim and set it aside.
4. Install the new shelf trim. Grab the new MCR65017001 LG refrigerator shelf trim, and slide it into place. The trim should fit snugly into the refrigerator.
5. Reinstall the shelves. Once the new shelf trim is in place, reinstall the shelves, lining them up with the holes in the refrigerator wall. Using the Phillips head screwdriver, screw the shelves securely into place.
6. Wipe up any spills. If there are any spills on the shelves or trim, use a towel to clean them up.
7. Plug your refrigerator back in and check that the shelves and trim are secure. Now your MCR65017001 LG refrigerator shelf trim, decor cover assembly has been replaced and you can continue to enjoy your refrigerator.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Having an old or broken shelf trim, decor cover assembly on your LG refrigerator can be a cause of annoyance. But replacing your MCR65017001 LG refrigerator shelf trim, decor cover assembly doesn’t have to be complicated. With some basic knowledge and tools you can replace your shelf trim, decor cover assembly in no time.
Tools Needed:
•Phillips head screwdriver
•Towel
Instructions:
1. Unplug your refrigerator. Because you will be removing parts of the refrigerator, it is safest to unplug the appliance before opening it.
2. Remove the shelves. You will find them attached to the side of the refrigerator, behind the door. Using a Phillips head screwdriver, remove the screws from the shelf brackets. Once the screws are out, pull the shelves away from the wall and set aside.
3. Remove the shelf trim. Next, find the shelf trim. It should be located underneath the top shelf. Gently pull out the shelf trim and set it aside.
4. Install the new shelf trim. Grab the new MCR65017001 LG refrigerator shelf trim, and slide it into place. The trim should fit snugly into the refrigerator.
5. Reinstall the shelves. Once the new shelf trim is in place, reinstall the shelves, lining them up with the holes in the refrigerator wall. Using the Phillips head screwdriver, screw the shelves securely into place.
6. Wipe up any spills. If there are any spills on the shelves or trim, use a towel to clean them up.
7. Plug your refrigerator back in and check that the shelves and trim are secure. Now your MCR65017001 LG refrigerator shelf trim, decor cover assembly has been replaced and you can continue to enjoy your refrigerator.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
