MAP61913707 LG Washer Rear Tub Ball Bearing
Rear tub ball bearing for some models of LG washing machines.
Weight : 0.0256 lbs
Dimension : 2.2834 x 2.0866 x 0.748
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Rear tub ball bearing for some models of LG washing machines.
Weight : 0.0256 lbs
Dimension : 2.2834 x 2.0866 x 0.748
Write Your Own Review
The following parts are replaced by this product
- 4280FR4048J
- 4280FR4048T
DIY Guide to Replacing LG Washer Rear Tub Ball Bearing (MAP61913707)
Are you experiencing noisy or off-balanced washer operations? If you have an LG Washer, chances are you may need to replace the MAP61913707 Rear Tub Ball Bearing. This guide will help provide the steps on how to successfully replace your LG Washer Rear Tub Ball Bearing, without needing a pro.
Things You’ll Need:
- New LG Washer Rear Tub Ball Bearing (MAP61913707)
- Standard or Phillips screwdriver
- Pliers
Instructions:
1. Before beginning, unplug your washer from power and turn off the water supply to avoid any potential shock or damage.
2. Remove the agitator and the top of the washer. Depending on your model, you may need to use a standard or Phillips screwdriver for this step.
3. Take off the rear panel and the drum support. This is held in place by multiple screws on the back of the unit.
4. Remove the old LG Washer Rear Tub Ball Bearing from the rear tub. This can be done with pliers, but take precaution not to damage the washer’s surface.
5. Once the old bearing is removed, insert the new MAP61913707 LG Washer Rear Tub Ball Bearing and make sure it is properly seated in its position. Make sure the speedy is tightened but not too tight.
6. Reinstall the drum support and the rear panel before putting the agitator and top back on.
7. Finally, plug in the washer and reconnect the water supply.
By following these instructions, you should now know how to replace the LG Washer Rear Tub Ball Bearing (MAP61913707).
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you experiencing noisy or off-balanced washer operations? If you have an LG Washer, chances are you may need to replace the MAP61913707 Rear Tub Ball Bearing. This guide will help provide the steps on how to successfully replace your LG Washer Rear Tub Ball Bearing, without needing a pro.
Things You’ll Need:
- New LG Washer Rear Tub Ball Bearing (MAP61913707)
- Standard or Phillips screwdriver
- Pliers
Instructions:
1. Before beginning, unplug your washer from power and turn off the water supply to avoid any potential shock or damage.
2. Remove the agitator and the top of the washer. Depending on your model, you may need to use a standard or Phillips screwdriver for this step.
3. Take off the rear panel and the drum support. This is held in place by multiple screws on the back of the unit.
4. Remove the old LG Washer Rear Tub Ball Bearing from the rear tub. This can be done with pliers, but take precaution not to damage the washer’s surface.
5. Once the old bearing is removed, insert the new MAP61913707 LG Washer Rear Tub Ball Bearing and make sure it is properly seated in its position. Make sure the speedy is tightened but not too tight.
6. Reinstall the drum support and the rear panel before putting the agitator and top back on.
7. Finally, plug in the washer and reconnect the water supply.
By following these instructions, you should now know how to replace the LG Washer Rear Tub Ball Bearing (MAP61913707).
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
