EBR76332902 LG Power Control Board Assembly
Power Control Board (PCB Assembly) Sub works with some LG models of Ranges
Weight : 0.008700 lbs
Dimension : 1.850000 x 1.400000 x 0.650000
Power Control Board (PCB Assembly) Sub works with some LG models of Ranges
Weight : 0.008700 lbs
Dimension : 1.850000 x 1.400000 x 0.650000
Write Your Own Review
1. Unplug the LG appliance from the wall socket and turn off any power switches connected to the appliance.
2. Open up the appliance and locate the Power Control Board (PCB Assembly). Use a screwdriver to unscrew the bolts or screws that are holding it into place.
3. Disconnect any wires that are connected to the PCB Assembly, noting the orientation of each wire so you can reconnect them correctly when you install the new board.
4. Remove the PCB Assembly from the appliance and discard it in a safe manner.
5. Buy a new EBR76332902 LG Power Control Board (PCB Assembly) online or at your local LG authorized parts retailer.
6. Install the new board in the same orientation as the old one, making sure to tighten all screws and bolts securely.
7. Turn the power switch on the appliance back on and plug the appliance back into the wall socket.
8. Test the appliance to make sure the new EBR76332902 LG Power Control Board (PCB Assembly) is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Open up the appliance and locate the Power Control Board (PCB Assembly). Use a screwdriver to unscrew the bolts or screws that are holding it into place.
3. Disconnect any wires that are connected to the PCB Assembly, noting the orientation of each wire so you can reconnect them correctly when you install the new board.
4. Remove the PCB Assembly from the appliance and discard it in a safe manner.
5. Buy a new EBR76332902 LG Power Control Board (PCB Assembly) online or at your local LG authorized parts retailer.
6. Install the new board in the same orientation as the old one, making sure to tighten all screws and bolts securely.
7. Turn the power switch on the appliance back on and plug the appliance back into the wall socket.
8. Test the appliance to make sure the new EBR76332902 LG Power Control Board (PCB Assembly) is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
