VICTOR2 TN TURBO GASKET+RING
The AGM30030702 LG Washer Door Boot Turbo Gasket is a genuine OEM (Original Equipment Manufacturer) part. Its primary function is to maintain a moisture barrier during intense wash cycles.
Weight : 32.626700 lbs
Dimension : 27.992100 x 22.244000 x 7.283400
The AGM30030702 LG Washer Door Boot Turbo Gasket is a genuine OEM (Original Equipment Manufacturer) part. Its primary function is to maintain a moisture barrier during intense wash cycles.
Weight : 32.626700 lbs
Dimension : 27.992100 x 22.244000 x 7.283400
Write Your Own Review
How to Replace the LG AGM30030702 VICTOR2 TN TURBO GASKET+RING
1. Shut off gas supply and close the shutoff valve. Make sure that the area around the appliance is free of any combustible materials. Make sure to wear gloves, eye protection and other protective gear.
2. Remove the screws or bolts that hold the burner assembly in place. Carefully lift the assembly out and set it aside.
3. Inspect the condition of the existing gasket and ring. If it is cracked or damaged, replace with a new one.
4. Place the new gasket around the edge of the burner assembly.
5. Secure the gasket to the burner assembly using bolts, screws or adhesive.
6. Place the ring over the edge of the gasket and secure it with screws or bolts.
7. Re-assemble the burner assembly, making sure everything is tightly secured.
8. Turn on the gas supply and open the shutoff valve.
9. Check for gas leaks.
10. Test the appliance to ensure it is functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Shut off gas supply and close the shutoff valve. Make sure that the area around the appliance is free of any combustible materials. Make sure to wear gloves, eye protection and other protective gear.
2. Remove the screws or bolts that hold the burner assembly in place. Carefully lift the assembly out and set it aside.
3. Inspect the condition of the existing gasket and ring. If it is cracked or damaged, replace with a new one.
4. Place the new gasket around the edge of the burner assembly.
5. Secure the gasket to the burner assembly using bolts, screws or adhesive.
6. Place the ring over the edge of the gasket and secure it with screws or bolts.
7. Re-assemble the burner assembly, making sure everything is tightly secured.
8. Turn on the gas supply and open the shutoff valve.
9. Check for gas leaks.
10. Test the appliance to ensure it is functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
