AEQ73110210 LG Refrigerator Ice Maker Kit Assembly
LG Electronic Sears Kenmore Refrigerator ICEMAKER ASSEMBLY AEQ73110210
We are a Factory Authorized Distributor for LG Electronics appliance parts (out of product warranty parts only). Trust us for all of your LG Electronics appliance parts and accessories needs.
We are a Factory Authorized Distributor for LG Electronics appliance parts (out of product warranty parts only). Trust us for all of your LG Electronics appliance parts and accessories needs.
Weight : 3.4161 lbs
Dimension : 12.4 x 6.85 x 5.55
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
LG Electronic Sears Kenmore Refrigerator ICEMAKER ASSEMBLY AEQ73110210
We are a Factory Authorized Distributor for LG Electronics appliance parts (out of product warranty parts only). Trust us for all of your LG Electronics appliance parts and accessories needs.
We are a Factory Authorized Distributor for LG Electronics appliance parts (out of product warranty parts only). Trust us for all of your LG Electronics appliance parts and accessories needs.
Weight : 3.4161 lbs
Dimension : 12.4 x 6.85 x 5.55
Write Your Own Review
The following parts are replaced by this product
- AEQ73110212
- AEQ73110211
Replacing the AEQ73110210 LG Refrigerator ICEMAKER ASSEMBLY
1. Unplug the refrigerator's power.
2. Locate and remove the ice bin tray by carefully pulling it toward you until it comes off the rails.
3. Remove the screws located at the rear of the old icemaker assembly.
4. Disconnect the electrical connection on the back of the old icemaker.
5. Carefully lift the old icemaker out of the refrigerator.
6. Take the new icemaker assembly and place it in the refrigerator.
7. Connect the electrical connection on the back of the new icemaker.
8. Reattach the screws that were removed earlier.
9. Place the ice bin tray back into the refrigerator, making sure it is properly located on the rails.
10. Plug the refrigerator's power back in.
Congratulations! You have successfully replaced the AEQ73110210 LG Refrigerator ICEMAKER ASSEMBLY.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the refrigerator's power.
2. Locate and remove the ice bin tray by carefully pulling it toward you until it comes off the rails.
3. Remove the screws located at the rear of the old icemaker assembly.
4. Disconnect the electrical connection on the back of the old icemaker.
5. Carefully lift the old icemaker out of the refrigerator.
6. Take the new icemaker assembly and place it in the refrigerator.
7. Connect the electrical connection on the back of the new icemaker.
8. Reattach the screws that were removed earlier.
9. Place the ice bin tray back into the refrigerator, making sure it is properly located on the rails.
10. Plug the refrigerator's power back in.
Congratulations! You have successfully replaced the AEQ73110210 LG Refrigerator ICEMAKER ASSEMBLY.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
