5214ER4001B LG Washer Dispenser Inlet Hose
Part #: LGE 5214ER4001B
LG Electronics Sears Kenmore Clothes Washer Washing Machine Dispenser Inlet Hose 5214ER4001B
Weight : 0.2719 lbs
Dimension : 17.4803 x 1.7716 x 1.2204
LG Electronics Sears Kenmore Clothes Washer Washing Machine Dispenser Inlet Hose 5214ER4001B
Weight : 0.2719 lbs
Dimension : 17.4803 x 1.7716 x 1.2204
Write Your Own Review
1. Begin by turning off the water supply to the washer. Do this by shutting off both the hot and cold water valves at the wall.
2. Unplug the washer from the wall outlet.
3. Disconnect the water lines from the inlet hose. Place a towel underneath the area to help with any water that may come out.
4. Remove the screws securing the old inlet hose to the back of the washer.
5. Slide the new inlet hose into place and reattach the screws.
6. Reconnect the water lines to their designated ports on the inlet hose. Tighten the connections using two wrenches, one for each connection.
7. Turn the water supply back on and check for any leaks.
8. Plug the washer back into the outlet and you’re done.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Unplug the washer from the wall outlet.
3. Disconnect the water lines from the inlet hose. Place a towel underneath the area to help with any water that may come out.
4. Remove the screws securing the old inlet hose to the back of the washer.
5. Slide the new inlet hose into place and reattach the screws.
6. Reconnect the water lines to their designated ports on the inlet hose. Tighten the connections using two wrenches, one for each connection.
7. Turn the water supply back on and check for any leaks.
8. Plug the washer back into the outlet and you’re done.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.