4738ER1002A LG Washer Drain Bellows Hose
Part #: LGE 4738ER1002A
LG Electronics Sears Kenmore Clothes Washer DRAIN BELLOWS HOSE 4738ER1002A
Call us with your LG Electronics Sears Kenmore Appliance model number to be sure you receive the correct LG Electronics Sears Kenmore Appliance parts.
Call us with your LG Electronics Sears Kenmore Appliance model number to be sure you receive the correct LG Electronics Sears Kenmore Appliance parts.
Weight : 4.3294 lbs
Dimension : 16.1811 x 10.9842 x 3.3858
LG Electronics Sears Kenmore Clothes Washer DRAIN BELLOWS HOSE 4738ER1002A
Call us with your LG Electronics Sears Kenmore Appliance model number to be sure you receive the correct LG Electronics Sears Kenmore Appliance parts.
Call us with your LG Electronics Sears Kenmore Appliance model number to be sure you receive the correct LG Electronics Sears Kenmore Appliance parts.
Weight : 4.3294 lbs
Dimension : 16.1811 x 10.9842 x 3.3858
Write Your Own Review
Replacing the 4738ER1002A LG Washer Drain Bellow Hose
If your LG front-loading washing machine is leaking water, you may need to replace the drain bellow hose. Replacing the drain bellow hose is a fairly simple task and can be done in a few easy steps.
Materials Needed:
• Pliers
• Cloth
• New LG replacement drain bellow hose (4738ER1002A)
Instructions:
1. Unplug the LG washer from the wall outlet.
2. Turn off the washer’s water supply by turning off the valves.
3. Put a cloth over the bottom of the washer to prevent any parts from dropping onto the floor.
4. Using pliers, remove the old drain bellow hose.
5. Take out and dispose of the old drain bellow hose.
6. Insert the new drain bellow hose into the washer’s housing.
7. Secure the bellow hose with pliers.
8. Plug the washer back in and turn on the water supply.
9. Check for leaks and tighten the bellow hose if necessary.
10. Clean up any spilled water and dispose of the cloth.
You have now successfully replaced the 4738ER1002A LG Washer Drain Bellow Hose.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If your LG front-loading washing machine is leaking water, you may need to replace the drain bellow hose. Replacing the drain bellow hose is a fairly simple task and can be done in a few easy steps.
Materials Needed:
• Pliers
• Cloth
• New LG replacement drain bellow hose (4738ER1002A)
Instructions:
1. Unplug the LG washer from the wall outlet.
2. Turn off the washer’s water supply by turning off the valves.
3. Put a cloth over the bottom of the washer to prevent any parts from dropping onto the floor.
4. Using pliers, remove the old drain bellow hose.
5. Take out and dispose of the old drain bellow hose.
6. Insert the new drain bellow hose into the washer’s housing.
7. Secure the bellow hose with pliers.
8. Plug the washer back in and turn on the water supply.
9. Check for leaks and tighten the bellow hose if necessary.
10. Clean up any spilled water and dispose of the cloth.
You have now successfully replaced the 4738ER1002A LG Washer Drain Bellow Hose.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.