4681EA2001T LG Washing Machine Drain Pump and Motor Assembly

100% Guaranteed genuine parts logo
Part #: LGE 4681EA2001T
100% Guaranteed genuine parts logo
LG Electronics Sears Kenmore Clothes Washer Pump & Motor Assembly 4681EA2001T

Weight : 0.4327 lbs
Dimension : 4.1 x 4.5 x 4.55
$41.67
In stock
LG Electronics Sears Kenmore Clothes Washer Pump & Motor Assembly 4681EA2001T

Weight : 0.4327 lbs
Dimension : 4.1 x 4.5 x 4.55
Write Your Own Review
Only registered users can write reviews. Please Sign in or Create an account

The following parts are replaced by this product

  1. 4681EA2001T
  2. 4681EA1007G
  3. 4681EA2001D
  4. 4681EA2001N
Replacing the 4681EA2001T LG Washing Machine Drain Pump & Motor Assembly

If your LG washing machine's drain pump isn't working properly, you may need to replace it. Performing this repair yourself is not only more economical than calling a professional, but can also help you save time. Here are some easy steps to help you replace the 4681EA2001T LG Washing Machine Drain Pump & Motor Assembly:

1. Unplug the washing machine from the wall and shut off the water supply. Make sure there is no electricity running to the machine before you begin.

2. Position something underneath the washing machine to protect the floor. This could be a large piece of cardboard or a thin blanket.

3. Carefully tilt the washing machine forward and place it on the board or blanket so you have access to the back of the appliance.

4. Using a screwdriver and wrench, remove any screws or clamps that are securing the back panel of the washing machine.

5. Find the drain pump, located near the bottom of the machine. It should have a hose attached to it.

6. Disconnect the hoses from the pump. You may need to loosen a clamp before you can do this.

7. Unscrew the mounting nuts that secure the pump to the washing machine and remove it.

8. Replace the old pump with the new 4681EA2001T LG Washing Machine Drain Pump & Motor Assembly.

9. Reattach the hoses to the new pump and make sure they are secure.

10. Secure the pump in place with the screws or clamps.

11. Place the back panel back on the washing machine and secure it with the screws.

12. Reconnect the electricity and water supply.

13. Test the new pump to make sure it works properly.

14. Once you have confirmed that the pump is working, turn the machine off and plug it back into the wall.

By following these simple steps, you can easily replace the 4681EA2001T LG Washing Machine Drain Pump & Motor Assembly with minimal effort. If you have any questions about the process, consult your owner's manual or call LG's customer support hotline.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Compatible with lg