91-2000-19-K0029 Greenwald Sentinel II Key
Part #: GRW 91-2000-19-K0029
91-2000-19-K0029 Greenwald Sentinel II Key
Weight : 0.000000 lbs
91-2000-19-K0029 Greenwald Sentinel II Key
Weight : 0.000000 lbs
Write Your Own Review
Replacing the Greenwald Industries 91-2000-19-K0029 SENTINEL II KEYPAD
Tools and Materials Needed:
• Phillips-head screwdriver
• Greenwald Industries 91-2000-19-K0029 SENTINEL II KEYPAD
Step 1: Unscrew the existing keypad from the wall. Locate the four Phillips-head screws that secure the keypad to the wall. Use your screwdriver to carefully loosen each screw and remove the keypad from the wall.
Step 2: Disconnect the cables from the back of the existing keypad. Depending on the keypad model, you may have to press a release tab or loosen a clamping screw to disconnect.
Step 3: Connect the cables to the new Greenwald Industries 91-2000-19-K0029 SENTINEL II KEYPAD. Press the connectors securely into the ports located at the back of the keypad.
Step 4: Screw the keypad to the wall. Using your Phillips-head screwdriver, carefully re-secure the keypad to the wall in the exact same holes your removed the old keypad from.
Step 5: Test the keypad. Once the keypad is secured to the wall, test the operation of the keypad to ensure it is working properly. If the keypad functions properly, you have successfully replaced the old Greenwald Industries 91-2000-19-K0029 SENTINEL II KEYPAD.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools and Materials Needed:
• Phillips-head screwdriver
• Greenwald Industries 91-2000-19-K0029 SENTINEL II KEYPAD
Step 1: Unscrew the existing keypad from the wall. Locate the four Phillips-head screws that secure the keypad to the wall. Use your screwdriver to carefully loosen each screw and remove the keypad from the wall.
Step 2: Disconnect the cables from the back of the existing keypad. Depending on the keypad model, you may have to press a release tab or loosen a clamping screw to disconnect.
Step 3: Connect the cables to the new Greenwald Industries 91-2000-19-K0029 SENTINEL II KEYPAD. Press the connectors securely into the ports located at the back of the keypad.
Step 4: Screw the keypad to the wall. Using your Phillips-head screwdriver, carefully re-secure the keypad to the wall in the exact same holes your removed the old keypad from.
Step 5: Test the keypad. Once the keypad is secured to the wall, test the operation of the keypad to ensure it is working properly. If the keypad functions properly, you have successfully replaced the old Greenwald Industries 91-2000-19-K0029 SENTINEL II KEYPAD.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
