8-1275-0-6 Greenwald Appliance UG800B Coin Box

Step 1: Unscrew the four screws located at the bottom corners of the Greenwald Industries Coin Operated Laundry Coin Box, UG800B.

Step 2: Take out the coin box, but be careful not to damage the wiring connected to the back of the coin box.

Step 3: Disconnect the 5-pin cable connector from the back of the coin box.

Step 4: Take out the lock core by inserting the key and turning the key clockwise or counter-clockwise.

Step 5: Replace the old lock core with a new Greenwald Industries Coin Operated Laundry Coin Box, UG800B Tubular Lock with Key.

Step 6: Re-connect the 5-pin cable to the back of the coin box.

Step 7: Secure the Coin Box in place by using the four screws at the bottom corners.

Step 8: Test the new lock to make sure it is working properly.

Congratulations! You have successfully replaced the Greenwald Industries Coin Operated Laundry Coin Box, UG800B Tubular Lock with Key.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.