68-1174-32-777 Greenwald Coin Operated Laundry Lock and Key

DIY Guide to Replacement of 68-1174-32-777 Greenwald Industries Coin Operated Laundry Lock and Key

If your Greenwald Industries Coin Operated Laundry Lock and Key has become worn, damaged, or lost, you may need to replace it. Replacing the lock and key is a relatively easy DIY task that only requires basic tools. Follow this guide to successfully swap out the Greenwald lock and key for your coin operated laundry machines.

Tools You Will Need

- Phillips screwdriver

- Wrench

Step 1: Locate the Lock

Open the top of the laundry machine and locate the Greenwald Industries Coin Operated Laundry Lock and Key. It should be mounted on the side of the machine.

Step 2: Remove Lock from Machine

Using the Phillips screwdriver, remove the screws that are securing the Greenwald lock and key to the machine.

Step 3: Install New Lock and Key

Line up the new lock and key with the mounting bracket that the old one was attached to, then secure it using the screws and the wrench. Make sure that the screws are tight to ensure that the lock and key are securely fastened to the washer.

Step 4: Test the New Lock and Key

Check that the new lock and key is working properly by inserting coins into the machine and activating the cycle.

Now you’ve successfully replaced the 68-1174-32-777 Greenwald Industries Coin Operated Laundry Lock and Key. Congratulations!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.