WR55X11132 GE Refrigerator LED Light Cover Assembly

1. Turn off your refrigerator power at the circuit breaker.

2. Open your refrigerator door, and locate the LED light cover assembly in the upper right corner.

3. Using a screwdriver, remove the three screws that secure the LED light cover assembly to the refrigerator's interior.

4. Carefully pull the LED light cover assembly away from the refrigerator's interior, ensuring not to damage any of the wiring connections.

5. Unscrew the two screws holding the wiring harness to the back of the old LED light cover.

6. Remove the old LED light cover from the wiring harness.

7. Install the new LED light cover onto the wiring harness and secure it with the two screws.

8. Reattach the LED light cover assembly back onto the interior of the refrigerator with the three screws.

9. Turn the refrigerator power back on at the circuit breaker.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.