WR02X13628 GE Shelf Retainer Bar Support
Part #: GEN WR02X13628
WR02X13628 GE Shelf Retainer Bar Support
Weight : 0.777000 lbs
Dimension : 8.000000 x 7.500000 x 1.800000
WR02X13628 GE Shelf Retainer Bar Support
Weight : 0.777000 lbs
Dimension : 8.000000 x 7.500000 x 1.800000
Write Your Own Review
Replacing the GE WR02X13628 SUPPORT BIN FZ
Tools Required:
-Phillips screwdriver
-Flat head screwdriver
Instructions:
1. Unplug the refrigerator from its power source.
2. Locate the support bin and remove it by grasping and pulling away from the freezer door.
3. Using a Phillips head screwdriver, remove the two screws that hold the support bin in place.
4. Discard the old support bin, and insert the new support bin into the opening.
5. Secure the new support bin with the two screws removed in step 3.
6. Plug the refrigerator back into its power source.
7. Test the newly-replaced support bin to ensure proper operation.
Congratulations! You have successfully replaced the GE WR02X13628 Support Bin FZ.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Required:
-Phillips screwdriver
-Flat head screwdriver
Instructions:
1. Unplug the refrigerator from its power source.
2. Locate the support bin and remove it by grasping and pulling away from the freezer door.
3. Using a Phillips head screwdriver, remove the two screws that hold the support bin in place.
4. Discard the old support bin, and insert the new support bin into the opening.
5. Secure the new support bin with the two screws removed in step 3.
6. Plug the refrigerator back into its power source.
7. Test the newly-replaced support bin to ensure proper operation.
Congratulations! You have successfully replaced the GE WR02X13628 Support Bin FZ.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.