WR01X11023 GE Refrigerator Retainer
The GE WR01X11023 PIN CROSS BAR We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.217 lbs
Dimension : 7.559 x 4.0551 x 0.9842
The GE WR01X11023 PIN CROSS BAR We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.217 lbs
Dimension : 7.559 x 4.0551 x 0.9842
Write Your Own Review
1. Start by gathering the necessary tools and supplies to replace your GE WR01X11023 PIN CROSS BAR. These include a Phillips head screwdriver, pliers, a new GE WR01X11023 PIN CROSS BAR and safety glasses.
2. Put on the safety glasses to protect your eyes from any debris or particles.
3. Using a Phillips head screwdriver, remove the screws that secure the old GE WR01X11023 PIN CROSS BAR in place.
4. Carefully lift the old GE WR01X11023 PIN CROSS BAR out of the appliance.
5. Using pliers, remove any excess plastic or metal material from the area where the new GE WR01X11023 PIN CROSS BAR will fit.
6. Set the new GE WR01X11023 PIN CROSS BAR in place and secure it using the same screws you removed earlier.
7. Make sure to tighten the screws so that the GE WR01X11023 PIN CROSS BAR is secure.
8. Once the GE WR01X11023 PIN CROSS BAR is securely in place, you have successfully replaced the part.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Put on the safety glasses to protect your eyes from any debris or particles.
3. Using a Phillips head screwdriver, remove the screws that secure the old GE WR01X11023 PIN CROSS BAR in place.
4. Carefully lift the old GE WR01X11023 PIN CROSS BAR out of the appliance.
5. Using pliers, remove any excess plastic or metal material from the area where the new GE WR01X11023 PIN CROSS BAR will fit.
6. Set the new GE WR01X11023 PIN CROSS BAR in place and secure it using the same screws you removed earlier.
7. Make sure to tighten the screws so that the GE WR01X11023 PIN CROSS BAR is secure.
8. Once the GE WR01X11023 PIN CROSS BAR is securely in place, you have successfully replaced the part.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
