WP85X10008 GE A04 Air Conditioner Air Filter

100% Guaranteed genuine parts logo
Part #: GEN WP85X10008
100% Guaranteed genuine parts logo
Rating:
100% of 100
Air filter works with some GE, and Hotpoint models of air conditioners.

Weight : 2.127800 lbs
Dimension : 16.220400 x 13.622000 x 1.338500
Special Price $15.14 Regular Price $16.82 10% off
In stock
Air filter works with some GE, and Hotpoint models of air conditioners.

Weight : 2.127800 lbs
Dimension : 16.220400 x 13.622000 x 1.338500
Write Your Own Review
You're reviewing:WP85X10008 GE A04 Air Conditioner Air Filter
Your Rating

Image size should not exceed 5 MB. File format must be JPG or PNG.

DIY Guide for Replacing the GE WP85X10008 Air Conditioner Air Filter

Introduction

Proper maintenance of an air conditioner is essential for keeping it running properly and providing optimal cooling capacity. One important maintenance task that should not be overlooked is replacing the air filter. A clean air filter will improve air flow, reduce energy costs, and prevent dirt and debris from entering the unit and damaging its components. Replacing the air filter in the GE WP85X10008 air conditioner is a simple DIY project that can be completed in a matter of minutes.

Step 1: Disconnect the power
Before beginning any work on an air conditioner, it is important to make sure the power is disconnected to ensure safety.

Step 2: Remove the Front Panel
The front panel of the air conditioner needs to be removed in order to access the air filter. There are usually two screws located at the bottom of the panel that need to be removed first. Once the screws are removed, the panel can be gently pulled away from the unit, revealing the air filter.

Step 3: Remove the Old Air Filter
The old air filter should be carefully pulled out of the unit. Be sure to toss the old air filter into the trash or recycle bin and not back into the air conditioner.

Step 4: Insert the New Air Filter
The new air filter will slide easily into the unit, making sure the direction arrows on the filter are pointing into the unit. The filter should fit securely into place and should not be difficult to insert.

Step 5: Replace the Front Panel and Re-connect the Power
Once the new air filter is in place, the front panel can be placed back onto the unit and secured with the two screws. Finally, the power should be reconnected to the unit and the air conditioner will be good to go.

Conclusion
Replacing the air filter in the GE WP85X10008 air conditioner is a quick and easy DIY project that can be completed in minutes. By regularly replacing the air filter, the air conditioner will run more efficiently and last longer.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Compatible with