WH41X25301 GE Hose Pressure
The GE WH41X25301 HOSE PRESSURE This hose is the perfect way to give your laundry setup a professional look and feel, so you can be sure it will last you for years to come. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.3022 lbs
Dimension : 8 x 7.5 x 0.7
The GE WH41X25301 HOSE PRESSURE This hose is the perfect way to give your laundry setup a professional look and feel, so you can be sure it will last you for years to come. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.3022 lbs
Dimension : 8 x 7.5 x 0.7
Write Your Own Review
Replacing the GE WH41X25301 Hose Pressure: A Step-by-Step DIY Guide
If you have a GE WH41X25301 appliance but it’s not working well, then replacing the hose pressure might be a good option. Follow this step-by-step guide to replace the hose pressure on your GE WH41X25301 appliance.
Step 1: Turn off the power and unplug the unit.
Step 2: Drain any remaining water out of the appliance by pressing the hose drain button.
Step 3: Remove the top panel. Start by removing the screws located at the top of the appliance and lift the top panel off.
Step 4: Disconnect the old hose pressure. Remove the hose from the connector at the back of the appliance and pull it away from the appliance.
Step 5: Install the new hose pressure. Connect the new hose to the connector at the back of the appliance and make sure it’s secure.
Step 6: Replace the top panel. Put the top panel back into place and reattach the screws that were removed in the first step.
Step 7: Plug the power cord back in and turn the power back on.
Now you should be able to get your GE WH41X25301 appliance back up and running with its brand new hose pressure!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If you have a GE WH41X25301 appliance but it’s not working well, then replacing the hose pressure might be a good option. Follow this step-by-step guide to replace the hose pressure on your GE WH41X25301 appliance.
Step 1: Turn off the power and unplug the unit.
Step 2: Drain any remaining water out of the appliance by pressing the hose drain button.
Step 3: Remove the top panel. Start by removing the screws located at the top of the appliance and lift the top panel off.
Step 4: Disconnect the old hose pressure. Remove the hose from the connector at the back of the appliance and pull it away from the appliance.
Step 5: Install the new hose pressure. Connect the new hose to the connector at the back of the appliance and make sure it’s secure.
Step 6: Replace the top panel. Put the top panel back into place and reattach the screws that were removed in the first step.
Step 7: Plug the power cord back in and turn the power back on.
Now you should be able to get your GE WH41X25301 appliance back up and running with its brand new hose pressure!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
