WH03X32218 GE 1/3 Hp Motor Pulley & Nut
Part #: GEN WH03X32218
1/3 HP motor pulley and nut works with some GE, and Hotpoint models of washing machines.
Weight : 0.7105 lbs
Dimension : 6.6929 x 6.6929 x 2.2047
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
1/3 HP motor pulley and nut works with some GE, and Hotpoint models of washing machines.
Weight : 0.7105 lbs
Dimension : 6.6929 x 6.6929 x 2.2047
Write Your Own Review
The following parts are replaced by this product
- WH07X24695
- WH49X25378
- WH39X27601
Replacing the GE WH03X32218 1/3 HP Motor Pulley & Nut
This guide will provide step-by-step instructions on how to replace the pulley and nut of the GE WH03X32218 1/3 HP Motor. This simple task can be completed in a few minutes with minimal tools. To perform this task, you will need a wrench, a screwdriver, and a new pulley and nut.
Step 1: Unplug the motor from the wall outlet and remove any screws securing the motor’s housing.
Step 2: Remove the old pulley and nut from the motor shaft.
Step 3: Make sure that the new pulley and nut are compatible with your motor (check for appropriate size and thread specifications).
Step 4: Install the new pulley and nut onto the motor shaft and secure with the wrench.
Step 5: Replace any screws securing the motor’s housing and plug the motor back into the power outlet.
You have now replaced the pulley and nut of the GE WH03X32218 1/3 HP Motor. Congratulations!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
This guide will provide step-by-step instructions on how to replace the pulley and nut of the GE WH03X32218 1/3 HP Motor. This simple task can be completed in a few minutes with minimal tools. To perform this task, you will need a wrench, a screwdriver, and a new pulley and nut.
Step 1: Unplug the motor from the wall outlet and remove any screws securing the motor’s housing.
Step 2: Remove the old pulley and nut from the motor shaft.
Step 3: Make sure that the new pulley and nut are compatible with your motor (check for appropriate size and thread specifications).
Step 4: Install the new pulley and nut onto the motor shaft and secure with the wrench.
Step 5: Replace any screws securing the motor’s housing and plug the motor back into the power outlet.
You have now replaced the pulley and nut of the GE WH03X32218 1/3 HP Motor. Congratulations!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.