WH01X24180 GE Washer Drive Belt
Part #: GEN WH01X24180
This genuine OEM GE Drive Belt is perfect for bringing life back into your worn-out washer. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts
Weight : 0.2221 lbs
Dimension : 4.33 x 4.29 x 1.65
This genuine OEM GE Drive Belt is perfect for bringing life back into your worn-out washer. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts
Weight : 0.2221 lbs
Dimension : 4.33 x 4.29 x 1.65
Write Your Own Review
1. Unplug the washer from the wall socket.
2. Remove the two screws on the back of the washer using a Phillips head screwdriver.
3. Carefully pull back the top panel and remove it from the washer.
4. Locate the belt around the motor pulley and idler pulley.
5. Remove the belt by lifting it off the motor pulley and idler pulley.
6. Place the new belt around the motor pulley and idler pulley.
7. Secure the top panel back onto the washer and replace the two screws.
8. Plug the washer back into the wall socket.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the two screws on the back of the washer using a Phillips head screwdriver.
3. Carefully pull back the top panel and remove it from the washer.
4. Locate the belt around the motor pulley and idler pulley.
5. Remove the belt by lifting it off the motor pulley and idler pulley.
6. Place the new belt around the motor pulley and idler pulley.
7. Secure the top panel back onto the washer and replace the two screws.
8. Plug the washer back into the wall socket.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.