WE3X87 GE Rear Drum Slide Bearing
General Electric - Hotpoint Dryer Rear Drum Bearing WE3X87
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Weight : 0.0445 lbs
Dimension : 2.3228 x 1.5748 x 1.6929
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
General Electric - Hotpoint Dryer Rear Drum Bearing WE3X87
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Weight : 0.0445 lbs
Dimension : 2.3228 x 1.5748 x 1.6929
Write Your Own Review
The following parts are replaced by this product
- WE3X76
- WE3X83
- WE3X84
- WE03X0076
- WE03X0083
- WE03X0084
- WE03X0087
1. First, unplug the power cord from the wall outlet and disconnect the drum from the power source to prevent injuries from electric shocks.
2. Remove the screws from the bearing plate at the rear of the dryer using a Phillip's head screwdriver.
3. Pull the bearing out of the dryer and discard it.
4. Place the new GE WE3X87 Rear Drum Slide Bearing into the dryer's frame.
5. Secure the bearing into place with the screws you removed in step two.
6. Re-connect the drum to the power source and plug the power cord into the wall outlet.
7. Test the dryer to ensure the new bearing is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the screws from the bearing plate at the rear of the dryer using a Phillip's head screwdriver.
3. Pull the bearing out of the dryer and discard it.
4. Place the new GE WE3X87 Rear Drum Slide Bearing into the dryer's frame.
5. Secure the bearing into place with the screws you removed in step two.
6. Re-connect the drum to the power source and plug the power cord into the wall outlet.
7. Test the dryer to ensure the new bearing is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
