WE04X25195 GE Washer Dryer Cycle Thermostat
Part #: GEN WE04X25195
Cycle thermostat works with some GE, and Hotpoint models of clothes dryers.
Weight : 0.3626 lbs
Dimension : 6 x 6 x 1.4
Cycle thermostat works with some GE, and Hotpoint models of clothes dryers.
Weight : 0.3626 lbs
Dimension : 6 x 6 x 1.4
Write Your Own Review
1. Unplug your dryer from the power source to avoid electrocution or injury.
2. Remove the dryer's back panel to access the thermostat.
3. Unscrew and disconnect the wires connected to the existing thermostat with a screwdriver.
4. Remove the existing thermostat and replace it with a new WE04X25195 GE Dryer Cycle Thermostat.
5. Connect the wires to the new thermostat in the same position as the old one (wire colors should match).
6. Screw the new thermostat in place.
7. Reinstall the back panel and plug the dryer into the power source.
8. Test the dryer for proper operation.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the dryer's back panel to access the thermostat.
3. Unscrew and disconnect the wires connected to the existing thermostat with a screwdriver.
4. Remove the existing thermostat and replace it with a new WE04X25195 GE Dryer Cycle Thermostat.
5. Connect the wires to the new thermostat in the same position as the old one (wire colors should match).
6. Screw the new thermostat in place.
7. Reinstall the back panel and plug the dryer into the power source.
8. Test the dryer for proper operation.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.