WD34X27119 GE Dishwasher Console Cover and Graphics

Step 1: Unplug the dishwasher from the wall outlet, finding the plug located at the lower section of the unit.

Step 2: Carefully tilt the dishwasher forward to access the screws holding the console cover and graphics assembly onto the frame.

Step 3: Remove the four screws located at the corners of the console cover and graphics assembly.

Step 4: Pull the old console cover and graphics assembly away from the dishwasher frame, as it may be slightly firmly held in place by clips.

Step 5: Place the new console cover and graphics assembly over the dishwasher frame, then reinstall the four screws in the corners.

Step 6: Securely tighten the screws to the dishwasher frame.

Step 7: Lower the dishwasher back into its upright position, then plug the dishwasher back into the wall outlet.

Step 8: Test the operation of the dishwasher to make sure that it functions correctly with the new console cover and graphics assembly installed.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.