WD21X22916 GE Dishwasher Wire Harness
The GE WD21X22916 HARNESS ASM DOOR is essential for your appliance. It helps maintain the connection between the dishwasher door and control board. With durable construction and easy-to-install design, this part will have your appliance running like new in no time. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.1833 lbs
Dimension : 9.0157 x 1.8897 x 1.496
The GE WD21X22916 HARNESS ASM DOOR is essential for your appliance. It helps maintain the connection between the dishwasher door and control board. With durable construction and easy-to-install design, this part will have your appliance running like new in no time. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.1833 lbs
Dimension : 9.0157 x 1.8897 x 1.496
Write Your Own Review
Replacing the GE WD21X22916 Harness Assembly Door
Replacing the door harness assembly on a GE dishwasher model WD21X22916 is a relatively simple project that you can complete in a few steps. Before beginning, make sure that the power to the dishwasher is turned off.
1. Start by removing the screws at the top of the control panel, using a Phillips head screwdriver. Pull the control panel away from the body of the dishwasher and set aside.
2. Remove the screws securing the existing harness in place. Carefully pull the harness away from the appliance, taking note of its connections.
3. Take the replacement harness and connect the wires in the same manner they were connected to the old harness. Secure the harness in place using the screws from the old harness.
4. Pull the ends of the harness through the opening in the control panel, then carefully push the control panel back into place. Secure the control panel with the screws you removed earlier.
5 Re-attach the door to the body of the dishwasher, ensuring that the wires are firmly attached. Finally, turn the power back on and test the dishwasher to make sure everything is working properly.
Following these instructions should have your GE dishwasher running smoothly with a new harness assembly quickly and safely.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the door harness assembly on a GE dishwasher model WD21X22916 is a relatively simple project that you can complete in a few steps. Before beginning, make sure that the power to the dishwasher is turned off.
1. Start by removing the screws at the top of the control panel, using a Phillips head screwdriver. Pull the control panel away from the body of the dishwasher and set aside.
2. Remove the screws securing the existing harness in place. Carefully pull the harness away from the appliance, taking note of its connections.
3. Take the replacement harness and connect the wires in the same manner they were connected to the old harness. Secure the harness in place using the screws from the old harness.
4. Pull the ends of the harness through the opening in the control panel, then carefully push the control panel back into place. Secure the control panel with the screws you removed earlier.
5 Re-attach the door to the body of the dishwasher, ensuring that the wires are firmly attached. Finally, turn the power back on and test the dishwasher to make sure everything is working properly.
Following these instructions should have your GE dishwasher running smoothly with a new harness assembly quickly and safely.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
