WD21X20309 GE Dishwasher Conduit Mid Blaster
The WD21X20309 GE Conduit Mid Blaster is ideal for quickly and easily breaking up clogs in your dishwasher. This tool's strong blasting helps clear away the toughest build-up, allowing your dishwasher to work more efficiently. It features a comfortable rubber handle grip and a long, flexible steel wand that can access even hard-to-reach areas. This tool is suitable for use with both hot and cold water systems, making it a must-have for all households. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.0303 lbs
Dimension : 11.0629 x 4.5669 x 2.8346
The WD21X20309 GE Conduit Mid Blaster is ideal for quickly and easily breaking up clogs in your dishwasher. This tool's strong blasting helps clear away the toughest build-up, allowing your dishwasher to work more efficiently. It features a comfortable rubber handle grip and a long, flexible steel wand that can access even hard-to-reach areas. This tool is suitable for use with both hot and cold water systems, making it a must-have for all households. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.0303 lbs
Dimension : 11.0629 x 4.5669 x 2.8346
Write Your Own Review
Step 1: Unplug your dishwasher from the power outlet before you start work on it.
Step 2: Confirm that the issue with your dishwasher is the damaged conduit mid blaster for the proper part replacement.
Step 3: Purchase a new WD21X20309 GE Conduit Mid Blaster from an authorized dealer or online retailer.
Step 4: Take off the front panel of the dishwasher and locate the mid blaster.
Step 5: Unscrew the screws that hold the mid blaster in place using a Phillips head screwdriver.
Step 6: Inspect the wiring connected to the old mid blaster to make sure the connections are secure.
Step 7: Disconnect the wires from the terminals on the old mid blaster by unscrewing the screw holding them in place.
Step 8: Connect the wires to the new mid blaster and tighten the screws to ensure the connections are secure.
Step 9: Carefully place the new mid blaster into the housing and screw it into place using the Phillips head screwdriver.
Step 10: Put the front panel back on and plug the dishwasher back into the power outlet.
Step 11: Test out the dishwasher to make sure it is properly functioning after the conduit mid blaster has been replaced.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Confirm that the issue with your dishwasher is the damaged conduit mid blaster for the proper part replacement.
Step 3: Purchase a new WD21X20309 GE Conduit Mid Blaster from an authorized dealer or online retailer.
Step 4: Take off the front panel of the dishwasher and locate the mid blaster.
Step 5: Unscrew the screws that hold the mid blaster in place using a Phillips head screwdriver.
Step 6: Inspect the wiring connected to the old mid blaster to make sure the connections are secure.
Step 7: Disconnect the wires from the terminals on the old mid blaster by unscrewing the screw holding them in place.
Step 8: Connect the wires to the new mid blaster and tighten the screws to ensure the connections are secure.
Step 9: Carefully place the new mid blaster into the housing and screw it into place using the Phillips head screwdriver.
Step 10: Put the front panel back on and plug the dishwasher back into the power outlet.
Step 11: Test out the dishwasher to make sure it is properly functioning after the conduit mid blaster has been replaced.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
