WD18X21754 GE Dishwasher Passive Diverter Assembly Kit
Passive diverter assembly kit works with some GE, Hotpoint, and RCA models of dishwashers.
Weight : 0.3379 lbs
Dimension : 4.8818 x 3.8188 x 2.5196
Passive diverter assembly kit works with some GE, Hotpoint, and RCA models of dishwashers.
Weight : 0.3379 lbs
Dimension : 4.8818 x 3.8188 x 2.5196
Write Your Own Review
DIY Guide to Replacing a WD18X21754 GE Dishwasher Passive Diverter Assembly Kit
Replacing the passive diverter assembly kit on your GE Dishwasher is an easy do-it-yourself project that can be completed in under an hour. With the right tools and know-how, you'll be able to get your dishwasher working again in no time. Follow this guide to learn how to replace the passive diverter assembly on a WD18X21754 GE Dishwasher.
Tools Needed:
• Screwdriver
• Penetrating oil
• WD18X21754 GE Dishwasher Passive Diverter Assembly Replacement Kit
Instructions:
1. First, unplug the dishwasher before attempting any repairs.
2. Locate the diverter assembly on the inside of your dishwasher. It should look like a small metal box with three hoses connected to it.
3. Unscrew the screws that hold the diverter assembly in place using a screwdriver. You may have to use a bit of penetrating oil to get the screws loose if they are frozen.
4. Once the screws have been removed, carefully pull out the old diverter assembly.
5. Take the new assembly and place it into the dishwasher. Make sure that it is securely fastened in place.
6. Connect the hoses to the new diverter assembly and make sure they are secured tightly.
7. Replace the screws that were removed earlier and tighten them down with your screwdriver.
8. Plug the dishwasher back in and turn it on to make sure that the new diverter assembly is working properly.
After following these steps, your GE Dishwasher should be up and running again. Replacing the passive diverter assembly can be a quick and easy process when done correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the passive diverter assembly kit on your GE Dishwasher is an easy do-it-yourself project that can be completed in under an hour. With the right tools and know-how, you'll be able to get your dishwasher working again in no time. Follow this guide to learn how to replace the passive diverter assembly on a WD18X21754 GE Dishwasher.
Tools Needed:
• Screwdriver
• Penetrating oil
• WD18X21754 GE Dishwasher Passive Diverter Assembly Replacement Kit
Instructions:
1. First, unplug the dishwasher before attempting any repairs.
2. Locate the diverter assembly on the inside of your dishwasher. It should look like a small metal box with three hoses connected to it.
3. Unscrew the screws that hold the diverter assembly in place using a screwdriver. You may have to use a bit of penetrating oil to get the screws loose if they are frozen.
4. Once the screws have been removed, carefully pull out the old diverter assembly.
5. Take the new assembly and place it into the dishwasher. Make sure that it is securely fastened in place.
6. Connect the hoses to the new diverter assembly and make sure they are secured tightly.
7. Replace the screws that were removed earlier and tighten them down with your screwdriver.
8. Plug the dishwasher back in and turn it on to make sure that the new diverter assembly is working properly.
After following these steps, your GE Dishwasher should be up and running again. Replacing the passive diverter assembly can be a quick and easy process when done correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
