WD18X10051 GE Rear Feed Tube Adapter
The WD18X10051 GE Rear Feed Tube Adapter is an essential accessory for your dishwasher. With this adaptor, you can easily connect the water supply in the rear of your dishwasher so that it is securely connected and ready for use. This adapter has been designed to be compatible with most GE dishwashers and is simple to install. With this product, you can be sure that your dishes will be as clean and sparkling as possible after each and every wash cycle. Get the most out of your dishwasher with the WD18X10051 GE Rear Feed Tube Adapter. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.7338 lbs
Dimension : 8 x 7.5 x 1.7
The WD18X10051 GE Rear Feed Tube Adapter is an essential accessory for your dishwasher. With this adaptor, you can easily connect the water supply in the rear of your dishwasher so that it is securely connected and ready for use. This adapter has been designed to be compatible with most GE dishwashers and is simple to install. With this product, you can be sure that your dishes will be as clean and sparkling as possible after each and every wash cycle. Get the most out of your dishwasher with the WD18X10051 GE Rear Feed Tube Adapter. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.7338 lbs
Dimension : 8 x 7.5 x 1.7
Write Your Own Review
Replacing a WD18X10051 GE Rear Feed Tube Adapter
1. Unplug the power on your GE dishwasher. In order to prevent accidentally turning the machine on while replacing the feed tube adapter, it is important to unplug it before starting the repair.
2. Pull the dishwasher away from the wall and open the door. This will allow you to access the rear of the dishwasher.
3. Locate the WD18X10051 GE Rear Feed Tube Adapter. The feed tube adapter will be located at the back of the dishwasher near the bottom.
4. Unscrew the screws that hold the feed tube adapter in place. Be sure to remove all of the screws from the dishwasher before attempting to remove the feed tube adapter.
5. Carefully pull the old feed tube adapter out.
6. Insert the new WD18X10051 GE Rear Feed Tube Adapter into the same location. Make sure to align the screw holes with the ones that were used for the old feed tube adapter.
7. Tighten the screws that are holding the feed tube adapter in place.
8. Push the dishwasher back into place against the wall.
9. Plug the power back into the dishwasher.
Congratulations! You have successfully replaced the WD18X10051 GE Rear Feed Tube Adapter.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the power on your GE dishwasher. In order to prevent accidentally turning the machine on while replacing the feed tube adapter, it is important to unplug it before starting the repair.
2. Pull the dishwasher away from the wall and open the door. This will allow you to access the rear of the dishwasher.
3. Locate the WD18X10051 GE Rear Feed Tube Adapter. The feed tube adapter will be located at the back of the dishwasher near the bottom.
4. Unscrew the screws that hold the feed tube adapter in place. Be sure to remove all of the screws from the dishwasher before attempting to remove the feed tube adapter.
5. Carefully pull the old feed tube adapter out.
6. Insert the new WD18X10051 GE Rear Feed Tube Adapter into the same location. Make sure to align the screw holes with the ones that were used for the old feed tube adapter.
7. Tighten the screws that are holding the feed tube adapter in place.
8. Push the dishwasher back into place against the wall.
9. Plug the power back into the dishwasher.
Congratulations! You have successfully replaced the WD18X10051 GE Rear Feed Tube Adapter.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
