WD12X24390 GE Housing
Part #: GEN WD12X24390
The GE WD12X24390 UI Board Housing is custom designed for optimizing performance of your appliance.. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
The GE WD12X24390 UI Board Housing is custom designed for optimizing performance of your appliance.. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
Step 1: Start by unplugging the power cord from the back of the GE WD12X24390 HOUSING UI BOARD.
Step 2: Use a Phillips head screwdriver to remove all the screws on the housing panel, including the ones on the sides, top, and bottom.
Step 3: Take out the old board and locate the four pins at the top.
Step 4: Carefully insert the new board and make sure its pins are correctly lined up with the four pins on the housing.
Step 5: Secure the new board with the four pins and then fasten the screws to the housing panel.
Step 6: Plug the power cord to the back of the new board.
Step 7: Turn on the power to test if the new board is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Use a Phillips head screwdriver to remove all the screws on the housing panel, including the ones on the sides, top, and bottom.
Step 3: Take out the old board and locate the four pins at the top.
Step 4: Carefully insert the new board and make sure its pins are correctly lined up with the four pins on the housing.
Step 5: Secure the new board with the four pins and then fasten the screws to the housing panel.
Step 6: Plug the power cord to the back of the new board.
Step 7: Turn on the power to test if the new board is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.