WD12X10426 GE Upper Slide Rail Stop
The WD12X10426 from GE is an upper slide rail stop designed to provide stable and dependable support for kitchen appliances, including dishwashers. It's made from durable materials, ensuring it won't rust or corrode, even with frequent use. The easy-to-install design only requires you to screw in the two mounting screws to secure the stop into place. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.058 lbs
Dimension : 2.7559 x 2.3228 x 1.2598
The WD12X10426 from GE is an upper slide rail stop designed to provide stable and dependable support for kitchen appliances, including dishwashers. It's made from durable materials, ensuring it won't rust or corrode, even with frequent use. The easy-to-install design only requires you to screw in the two mounting screws to secure the stop into place. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.058 lbs
Dimension : 2.7559 x 2.3228 x 1.2598
Write Your Own Review
1. Unplug your dishwasher and turn off the water supply.
2. Carefully tilt your dishwasher back and prop it up so you can access the underside.
3. Locate the WD12X10426 GE Upper Slide Rail Stop.
4. Use a screwdriver to remove the screws holding the rail stop in place.
5. Gently pull off the old rail stop and discard it.
6. Place the new WD12X10426 GE Upper Slide Rail Stop in place and secure it with the screws.
7. Turn the water supply back on and plug the dishwasher back in.
8. Test the dishwasher functionality to ensure the rail stop is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Carefully tilt your dishwasher back and prop it up so you can access the underside.
3. Locate the WD12X10426 GE Upper Slide Rail Stop.
4. Use a screwdriver to remove the screws holding the rail stop in place.
5. Gently pull off the old rail stop and discard it.
6. Place the new WD12X10426 GE Upper Slide Rail Stop in place and secure it with the screws.
7. Turn the water supply back on and plug the dishwasher back in.
8. Test the dishwasher functionality to ensure the rail stop is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
