WB30T10074 GE Oven 8" Burner Unit 2600W
Part #: GEN WB30T10074
General Electric - Hotpoint Top Burner Surface Unit WB30T10074
● 2600W
● 240 Volts
● 8" Dia.
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
● 2600W
● 240 Volts
● 8" Dia.
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 0.8545 lbs
Dimension : 7.56 x 7.09 x 2.2
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
General Electric - Hotpoint Top Burner Surface Unit WB30T10074
● 2600W
● 240 Volts
● 8" Dia.
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
● 2600W
● 240 Volts
● 8" Dia.
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 0.8545 lbs
Dimension : 7.56 x 7.09 x 2.2
Write Your Own Review
The following parts are replaced by this product
- WB30T10033
- WB30T10110
1. Turn the power off to the burner unit. Unplug the unit from the electrical outlet.
2. Remove the old WB30T10074 burner unit. Use a screwdriver to remove the screws, then pull out and away from the range.
3. Carefully inspect the area around the base of the burner for any debris or dirt that may interfere with the installation of the replacement part. Clean if needed.
4. Align the two flat prongs on the bottom of the new WB30T10074 burner unit with the two round holes in the range.
5. Secure the burner unit to the range by tightening the screws around the edges of the base.
6. Plug the burner unit into the electrical outlet and turn the power on.
7. Test the burner unit to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the old WB30T10074 burner unit. Use a screwdriver to remove the screws, then pull out and away from the range.
3. Carefully inspect the area around the base of the burner for any debris or dirt that may interfere with the installation of the replacement part. Clean if needed.
4. Align the two flat prongs on the bottom of the new WB30T10074 burner unit with the two round holes in the range.
5. Secure the burner unit to the range by tightening the screws around the edges of the base.
6. Plug the burner unit into the electrical outlet and turn the power on.
7. Test the burner unit to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.