WB28X26604 GE Oven Burner Tube
WB28X26604 GE Oven Burner Tube
Weight : 0.904100 lbs
Dimension : 10.866100 x 3.582600 x 3.228300
WB28X26604 GE Oven Burner Tube
Weight : 0.904100 lbs
Dimension : 10.866100 x 3.582600 x 3.228300
Write Your Own Review
DIY Guide to Replacing GE WB28X26604 Front Orifice Holder Assembly
Are you looking for a DIY guide to replacing the GE WB28X26604 Front Orifice Holder Assembly? This guide will show you step-by-step how to easily replace the orifice holder assembly in a few simple steps.
Tools Needed:
-Flathead screwdriver
-Phillips head screwdriver
Step 1: Unplug the appliance from the power source and shut off the gas supply.
Step 2: Locate the screws used to secure the front panel of the appliance. Use the Phillips head screwdriver to remove the screws.
Step 3: Once the screws have been removed, carefully lift up on the front panel of the appliance and set it aside.
Step 4: Locate the existing GE WB28X26604 Front Orifice Holder Assembly. Unscrew the old orifice holder assembly and remove it from the appliance.
Step 5: Grab the replacement GE WB28X26604 Front Orifice Holder Assembly and secure it into the appliance using the same screws you used to remove the old one.
Step 6: Replace the front panel of the appliance and secure it with the screws.
Step 7: Turn the gas supply back on and plug the appliance back in.
You are now done with replacing the GE WB28X26604 Front Orifice Holder Assembly. Congratulations!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you looking for a DIY guide to replacing the GE WB28X26604 Front Orifice Holder Assembly? This guide will show you step-by-step how to easily replace the orifice holder assembly in a few simple steps.
Tools Needed:
-Flathead screwdriver
-Phillips head screwdriver
Step 1: Unplug the appliance from the power source and shut off the gas supply.
Step 2: Locate the screws used to secure the front panel of the appliance. Use the Phillips head screwdriver to remove the screws.
Step 3: Once the screws have been removed, carefully lift up on the front panel of the appliance and set it aside.
Step 4: Locate the existing GE WB28X26604 Front Orifice Holder Assembly. Unscrew the old orifice holder assembly and remove it from the appliance.
Step 5: Grab the replacement GE WB28X26604 Front Orifice Holder Assembly and secure it into the appliance using the same screws you used to remove the old one.
Step 6: Replace the front panel of the appliance and secure it with the screws.
Step 7: Turn the gas supply back on and plug the appliance back in.
You are now done with replacing the GE WB28X26604 Front Orifice Holder Assembly. Congratulations!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
