WB24X10146 GE Oven Micro Switch
This genuine GE WB24X10146 MICRO SWITCH G05 is the perfect replacement for non-functioning switches. The GE WB24X10146 is a genuine OEM Door Interlock Switch for Microwaves that prevents the microwave from starting when the door is open. Make sure your microwave is working safely and efficiently with this reliable micro switch from GE. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0358 lbs
Dimension : 2.1653 x 1.0629 x 2.1653
This genuine GE WB24X10146 MICRO SWITCH G05 is the perfect replacement for non-functioning switches. The GE WB24X10146 is a genuine OEM Door Interlock Switch for Microwaves that prevents the microwave from starting when the door is open. Make sure your microwave is working safely and efficiently with this reliable micro switch from GE. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0358 lbs
Dimension : 2.1653 x 1.0629 x 2.1653
Write Your Own Review
Replacing the GE WB24X10146 MICRO SWITCH G05
1. Unplug your appliance from the wall outlet and turn off any gas valves or main power switches connected to the appliance.
2. Remove the access panel, cabinet door or kick plate, if applicable, to access the switch.
3. Locate the existing switch and disconnect it.
4. Disconnect the wiring harness attached to the old switch. For most models, simply press down on the latch to release the wiring clips.
5. Remove the screws holding the switch in place.
6. Install the new switch by aligning the mounting holes with the ones in the panel.
7. Secure the new switch with the screws removed from the old switch.
8. Connect the wiring harness back to the new switch.
9. Reassemble the access panel, cabinet door, or kick plate.
10. Plug the appliance back in and test the new switch.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your appliance from the wall outlet and turn off any gas valves or main power switches connected to the appliance.
2. Remove the access panel, cabinet door or kick plate, if applicable, to access the switch.
3. Locate the existing switch and disconnect it.
4. Disconnect the wiring harness attached to the old switch. For most models, simply press down on the latch to release the wiring clips.
5. Remove the screws holding the switch in place.
6. Install the new switch by aligning the mounting holes with the ones in the panel.
7. Secure the new switch with the screws removed from the old switch.
8. Connect the wiring harness back to the new switch.
9. Reassemble the access panel, cabinet door, or kick plate.
10. Plug the appliance back in and test the new switch.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
