WB06X10889 GE Oven Mounting Kit
The WB06X10889 GE Mounting Kit provides a simple and secure way to mount your GE microwave. This kit is designed to fit with select GE microwaves.
Weight : 0.259 lbs
Dimension : 8 x 7.5 x 0.6
The WB06X10889 GE Mounting Kit provides a simple and secure way to mount your GE microwave. This kit is designed to fit with select GE microwaves.
Weight : 0.259 lbs
Dimension : 8 x 7.5 x 0.6
Write Your Own Review
DIY Guide to Replacing the GE WB06X10889 Mounting Kit
If your GE microwave needs a new mounting kit, then replacing the WB06X10889 GE Mounting Kit can be a straightforward and simple job. To help you get started, here is a step-by-step guide to replacing this particular kit.
Materials Needed:
• GE WB06X10889 Mounting Kit
• Screwdriver
• Drill (optional)
• Wrench
• Stud Finder
• Level
Step 1: Unplug the microwave from the power source and remove the existing mounting kit.
Step 2: Check the dimensions of the new installation so that you can choose a secure mounting spot. Make sure you pick an area on the wall or cabinet where the screws will be able to fit.
Step 3: Use a stud finder to locate the studs in the wall or cabinet. Mark the spots with a pencil so you know exactly where the screws need to be inserted.
Step 4: Place the WB06X10889 mounting kit onto the wall as per the instructions, and line it up with the studs you’ve previously marked.
Step 5: Use a drill with the appropriate drill bit to make the necessary holes for the four mounting screws. Alternately you can use a screwdriver if no drill is available.
Step 6: Insert the screws and secure them tightly with a wrench.
Step 7: Use a level to check that the mounting kit is level before tightening the remaining screws.
Step 8: Plug in the microwave and mount it on the new WB06X10889 mounting kit.
You’re done! With these easy steps, you successfully replaced the GE WB06X10889 Mounting Kit.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If your GE microwave needs a new mounting kit, then replacing the WB06X10889 GE Mounting Kit can be a straightforward and simple job. To help you get started, here is a step-by-step guide to replacing this particular kit.
Materials Needed:
• GE WB06X10889 Mounting Kit
• Screwdriver
• Drill (optional)
• Wrench
• Stud Finder
• Level
Step 1: Unplug the microwave from the power source and remove the existing mounting kit.
Step 2: Check the dimensions of the new installation so that you can choose a secure mounting spot. Make sure you pick an area on the wall or cabinet where the screws will be able to fit.
Step 3: Use a stud finder to locate the studs in the wall or cabinet. Mark the spots with a pencil so you know exactly where the screws need to be inserted.
Step 4: Place the WB06X10889 mounting kit onto the wall as per the instructions, and line it up with the studs you’ve previously marked.
Step 5: Use a drill with the appropriate drill bit to make the necessary holes for the four mounting screws. Alternately you can use a screwdriver if no drill is available.
Step 6: Insert the screws and secure them tightly with a wrench.
Step 7: Use a level to check that the mounting kit is level before tightening the remaining screws.
Step 8: Plug in the microwave and mount it on the new WB06X10889 mounting kit.
You’re done! With these easy steps, you successfully replaced the GE WB06X10889 Mounting Kit.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
