818980P Fisher & Paykel Refrigerator 120V Heater Defrost Kit 790
818980P is an original equipment manufactured (OEM) part. Ensure your refrigerator operates at peak efficiency with this essential defrost component from a trusted brand. Specifically designed for Fisher & Paykel models, this heater defrost kit (SKU: 818980P) effectively prevents ice buildup, promoting optimal cooling performance. When your appliance is running at its best, you can preserve your food longer and reduce energy consumption.
This high-quality part is easy to install, making it an ideal choice for DIY repairs. Compatible exclusively with Fisher & Paykel refrigerators, you can trust that this component will seamlessly integrate into your appliance. Invest in this defrost kit to maintain reliability and functionality, ensuring your refrigerator continues to meet your storage needs.
Weight : 0.000000 lbs
818980P is an original equipment manufactured (OEM) part. Ensure your refrigerator operates at peak efficiency with this essential defrost component from a trusted brand. Specifically designed for Fisher & Paykel models, this heater defrost kit (SKU: 818980P) effectively prevents ice buildup, promoting optimal cooling performance. When your appliance is running at its best, you can preserve your food longer and reduce energy consumption.
This high-quality part is easy to install, making it an ideal choice for DIY repairs. Compatible exclusively with Fisher & Paykel refrigerators, you can trust that this component will seamlessly integrate into your appliance. Invest in this defrost kit to maintain reliability and functionality, ensuring your refrigerator continues to meet your storage needs.
Weight : 0.000000 lbs
Write Your Own Review
1. Unplug the power cord from your Fisher & Paykel dryer and shut off the gas supply valve, if applicable.
2. Remove the top cover of the dryer by lifting it up and pulling it back.
3. Locate the heating element. It will be located near the bottom of the dryer, behind a protective cover.
4. Remove the screws that secure the protective cover in place and remove the cover.
5. Disconnect the wiring harnesses and unscrew the two hex nuts holding the heating element.
6. Remove the old heating element from the dryer.
7. Carefully inspect the new heating element (818980P) for defects or damage.
8. Place the new heating element in the same position as the old one and re-secure it with the two hex nuts.
9. Reconnect the wiring harnesses.
10. Replace the protective cover and fasten it with the screws.
11. Plug the power cord into an appropriate outlet and turn on the gas supply valve, if applicable.
12. Test the dryer to make sure it is working correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the top cover of the dryer by lifting it up and pulling it back.
3. Locate the heating element. It will be located near the bottom of the dryer, behind a protective cover.
4. Remove the screws that secure the protective cover in place and remove the cover.
5. Disconnect the wiring harnesses and unscrew the two hex nuts holding the heating element.
6. Remove the old heating element from the dryer.
7. Carefully inspect the new heating element (818980P) for defects or damage.
8. Place the new heating element in the same position as the old one and re-secure it with the two hex nuts.
9. Reconnect the wiring harnesses.
10. Replace the protective cover and fasten it with the screws.
11. Plug the power cord into an appropriate outlet and turn on the gas supply valve, if applicable.
12. Test the dryer to make sure it is working correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
