526212 Fisher & Paykel Dishwasher Front Housing LCD
This is a genuine OEM item made by Fisher & Paykel
Weight : 0.031100 lbs
Dimension : 2.795200 x 1.574800 x 0.984200
This is a genuine OEM item made by Fisher & Paykel
Weight : 0.031100 lbs
Dimension : 2.795200 x 1.574800 x 0.984200
Write Your Own Review
Step-by-Step Guide to Replacing the Fisher & Paykel 526212 HOUSING
1. Turn off the Water Supply: The first step is to turn off the water supply to prevent any water damage or leaks.
2. Drain the Machine: Once the water supply is turned off, remove the top panel and drain the machine completely by pressing and holding the "drain" button for at least 8 seconds.
3. Disconnect the Hoses: Disconnect all of the hoses from the back of the unit.
4. Remove the Old HOUSING: Using a screwdriver, unscrew and remove the existing HOUSING from the back of the machine.
5. Install New HOUSING: Take the new HOUSING and install it into the corresponding slots on the back of the machine. Secure it with the screws provided.
6. Reconnect Hoses: Using the new hoses provided, reconnect the hoses to the back of the machine.
7. Turn on Water Supply and Test: Turn the water supply back on, let the machine fill up with water, and test that the washer is working properly.
Follow these easy steps to successfully replace the Fisher & Paykel 526212 HOUSING.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Turn off the Water Supply: The first step is to turn off the water supply to prevent any water damage or leaks.
2. Drain the Machine: Once the water supply is turned off, remove the top panel and drain the machine completely by pressing and holding the "drain" button for at least 8 seconds.
3. Disconnect the Hoses: Disconnect all of the hoses from the back of the unit.
4. Remove the Old HOUSING: Using a screwdriver, unscrew and remove the existing HOUSING from the back of the machine.
5. Install New HOUSING: Take the new HOUSING and install it into the corresponding slots on the back of the machine. Secure it with the screws provided.
6. Reconnect Hoses: Using the new hoses provided, reconnect the hoses to the back of the machine.
7. Turn on Water Supply and Test: Turn the water supply back on, let the machine fill up with water, and test that the washer is working properly.
Follow these easy steps to successfully replace the Fisher & Paykel 526212 HOUSING.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
