1801M076 Brown Stove Gas Burner with Tube

DIY Brown Stove 1801M076 Replacement Instructions

1. Turn off the exhaust fan and disconnect all power sources to the stove. Shut off the gas valve if the Brown Stove is a gas model.

2. Unscrew and remove the back plate from the stove, if any.

3. Remove the burner grates and any other components you can access.

4. Carefully lift out the old stove. Make sure to have someone helping you move it as it will be heavy.

5. Place the new stove into the opening where the old one was. Make sure that it is level.

6. Reattach the back plate if any.

7. Secure the new stove to the floor or countertop with the screws provided.

8. Replace the burner grates, knobs, and other components.

9. Turn on the gas valve if applicable.

10. Reconnect the power source. Turn on the exhaust fan and test the stove.

Congratulations! You have successfully replaced your Brown Stove 1801M076.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.