Whirlpool Appliance Parts

This Top Load Washer Rotor Position Sensor communicates the position of the tub’s rotor to the control board during the washing cycle. If the appliance's motor isn’t worki ...ng properly to spin the wash tub, or your washer displays an error message, replacing the rotor position sensor may alleviate these issues. To access the part, tilt the washer back letting it rest on something to support it and tape the lid down. You'll need to remove the rotor and rotor stator at the bottom of the machine. The sensor is attached to the top of the stator. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Top Load Washer Rotor Position Sensor•  Tools Needed: Multi screwdriver, needle-nose pliers Read More Read Less

The Whirlpool WP3951632 AGITATOR is the perfect replacement part for your agitator in your top-loading washing machine. This agitator is designed to fit most Whirlpool and Ken ...more models and is a simple, direct-fit installation. The superior construction and design of this agitator ensures an extended life of your washing machine. Crafted with a durable plastic material, this agitator will get clothes clean and fresh every time. With its easy-to-use design, this agitator is sure to help minimize laundry day stresses — bringing more convenience to your life. Get your clothes cleaner and fresher than ever before with the Whirlpool WP3951632 AGITATOR. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs! Read More Read Less

This Top Load Washer Agitator spins and agitates your clothes properly so they can be washed. The agitator is located in the center of the wash drum and is secured by (1) bolt ... at its base. To secure the bolt into the new agitator before installing, turn the agitator upside down and put the new bolt in position. This assembly includes both the upper and lower parts of the agitator. Replacing this part will require basic tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Top Load Washer Agitator•  Tools Needed: Multi screwdriver Read More Read Less

The Ice Maker Thermistor monitors the temperature inside the appliance and sends the reading to the electronic control board. If your ice maker is making too much ice and caus ...ing the bin to overflow, replacing this part may alleviate this issue. Installing this part will require basic hand tools, some disassembly of the ice makerand novice repair experience. You must unplug the ice maker or shut off the house circuit breaker for the appliance before installing this part.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Ice Maker Thermistor•  Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Top Load Washer Lower Agitator moves your clothes back and forth during the wash cycle. To access the part, remove the fabric softener end cap and then remove the center ...bolt from the agitator. After pulling the agitator out of the machine, separate the lower agitator from the upper agitator and save the spacer washer that sits on top of the lower agitator so you can use it for the new part. Replacing this part will require basic tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Top Load Washer Lower Agitator•  Tools Needed: 7/16" socket range with extension Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Trash Compactor Drawer Handle allows the container of the appliance to be easily pulled in and out. This black plastic replacement part measures approx. 15-1/4 " L x 5" W ...and can easily replace a damaged or broken handle.Installing this part will require basic hand tools, some disassembly of the trash compactor and novice repair experience. You must unplug the compactor or shut off the house circuit breaker for the appliance before installing this part.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Trash Compactor Drawer Handle•  Tools Needed: Multi screwdriver Read More Read Less

The French Door Refrigerator Door Handle is a stainless steel part that attaches to the front of your refrigerator door to ease with opening and closing the compartment. This ...replacement part is easy to install and can replace a lost, damaged or stained handle on either the left or right door of the appliance. Note that the mounting screws are not included with this part and will need to be purchased separately. Please retain the mounting screws from the existing handle or see your model's parts list for the correct item number. Replacing this part will require basic hand tools, but no disassembly or repair experience.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) French Door Refrigerator Door Handle•  Tools Needed: Multi screwdriver Read More Read Less

The Refrigerator Door Handle, Stainless Steel is a sleek part that attaches to your refrigerator door to ease with opening and closing the compartment. Note that the mounting ...screws are not included with this part; you can reuse the existing screws or purchase new ones based on your model number. Replacing this part will require basic hand tools, but no disassembly or repair experience.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Refrigerator Door Handle, Stainless Steel•  Tools Needed: Multi screwdriver Read More Read Less