Maytag Appliance Parts

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dishwasher Drain Hose Clamp holds the end of the water hose in place to prevent the hose from leaking water. When disconnecting the lines underneath the sink, be sure to p ...lace a towel down to catch any leaking water. If you're also replacing the drain hose at the same time, make sure that the sink-end of the new hose is the correct size on the new hose before installing. If needed, you can cut the new hose end to fit the sink end. Replacing this part will require basic hand tools, minor disassembly of the dishwasher and novice repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this item. Also be sure to turn off the water supply to your dishwasher before you begin. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Drain Hose Clamp• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Top Freezer Refrigerator Start Device Relay with Overload is mounted to the side of the compressor on the back of the refrigerator and causes the compressor to start when ...refrigeration is needed. The overload provides protection for the compressor motor by preventing excessive temperature use.If your refrigerator is not cold, or you hear humming or clicking noises coming from the back of the appliance, the start device relay may need to be replaced. Note that this kit features an updated design that may differ from the existing assembly. Installing this part will require basic tools, some disassembly of the refrigerator and previous repair experience. Remember to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Freezer Refrigerator Start Device Relay with Overload• Tools Needed: Multi screwdriver, needle-nose pliers Read More Read Less

W11598120 is an original equipment manufactured (OEM) part. Optimize your appliance's performance with this high-quality thermostat designed to ensure accurate temperature con ...trol for your oven. Crafted by Whirlpool, this essential sensor and thermistor guarantees compatibility with multiple brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, Roper, and Whirlpool itself. Engineered for easy installation, this part provides reliable monitoring of your oven's heat, allowing for precise cooking and baking results. When your cooking appliance needs a reliable replacement, trust this thermostat to restore functionality and efficiency. Perfect for both DIY enthusiasts and professional repair technicians, it's a smart investment in the longevity of your oven. Maintain your kitchen appliance with this dependable component today and enjoy consistent cooking results. Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Gas Range Spark Ignition Switch Assembly includes the igniter switch and complete wire harness that supplies gas to light the surface burners on the cooktop. You may need ...this replacement part if the element itself shorted out, or if the igniter of your range glows for more than 90 seconds without lighting the gas flame – this indicates that the igniter is too weak to properly open the valve to allow the gas to feed through. The igniter must glow white hot to properly light the burner; if it glows red or orange it is not functioning properly. Replacing this assembly will require basic hand tools, disassembly of the gas range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Also make sure to turn the gas valve off before the repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Range Spark Ignition Switch Assembly• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.