Kitchenaid Appliance Parts

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Washer Tub Ring snaps over the top of the tub and creates a splash shield. If your washer's tub ring is cracked or damaged, your washer may become unbalanced and shake, an ...d you may need to replace this part. A damaged wing may also cause the washer to jam by allowing clothing to get between the two tubs. To access the tub ring, tape the washer lid down and remove the top two hinge screws at the back of the appliance that secure the top hinges to the rear panel. Remove the screws to the wiring and hinge cover and remove the cover. Then pull the main top forward and up to access the inside tub. Installing this part will require basic hand tools, minor disassembly of the washing machine and novice repair experience. You must unplug the washer or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your washer's hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Washer Tub Ring• Tools Needed: Multi screwdriver Read More Read Less

The Front Load Dryer Tumbler Bearing Kit is in the front of the dryer and the dryer drum rides along it. The Bearing Kit helps the drum rotate smoothly and quietly. If your dr ...um is making uncommon noise during operation, replacing this part may alleviate the issue. This kit includes the bearing, a cork pad, glide, and two rivets. Note that dryers use two of these bearings in the front and both should be replaced at the same time. You'll remove the door and the front panel of your dryer to install this part. Installation of this part requires the use of a rivet gun. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Dryer Tumbler Bearing Kit• Tools Needed: Multi screwdriver, 5/16" nut driver, rivet gun Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Dryer Drying Rack attaches to the inside of the dryer drum and remains stationary as the dryer turns so you can dry shoes, sweaters and other items that shouldn't be tumb ...led. This accessory can be used with many major dryer brands and models; check to see if your model number is compatible. Installation of this accessory will require no tools, disassembly or repair experience. Special shipping and handling is required for this item.Part Specification• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• Package contains (1) Dryer Drying Rack• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.