11028995 Bosch Refrigerator Tray

Replacing the Bosch 11028995 TRAY: A Step-by-Step Guide

Replacing the Bosch 11028995 TRAY can be a daunting task, but with the right materials and instructions, you can complete the job quickly and easily. Below is a step-by-step guide to help you successfully complete the job.

Materials Needed:
• New Bosch 11028995 TRAY
• Screwdriver
• Phillips head screwdriver bit

Step 1: Unplug the appliance from the electrical socket and remove any parts that are blocking access to the old tray. Typically, this includes trays and racks.

Step 2: With a Phillips head screwdriver, unscrew the four screws that are securing the old tray in place.

Step 3: Gently pull out the old tray and discard it.

Step 4: Take the new Bosch 11028995 TRAY and insert it into place. Make sure the tray is properly aligned and secure.

Step 5: Using the same Philips head screwdriver, secure the new Bosch 11028995 TRAY into place by screwing in the four screws that were originally used to secure the older tray.

Step 6: Reinsert any trays and racks that were removed in Step 1.

Step 7: Plug the appliance back into the electrical socket and make sure the new tray is secure before attempting to use it.

Congratulations! You have just replaced the Bosch 11028995 TRAY.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.