00704137 Bosch Small Appliance Tank

Replacing the Bosch 00704137 Coffee Maker Water Tank: DIY Instructions

Materials Needed:
1. New Bosch 00704137 water tank.
2. Philips screwdriver.

Step 1: Unplug the appliance from the power source.

Step 2: Remove the front panel of the coffee maker. This can usually be done by unscrewing the two top screws, using a Philips screwdriver.

Step 3: Disconnect the water line from the existing tank. You may need to use some pliers to unclip it first.

Step 4: Remove the existing tank by unscrewing the four screws that are holding it in place.

Step 5: Place the new water tank in position, lining up the holes in the bottom with the screws from the previous tank.

Step 6: Secure the new tank with the four screws you removed earlier.

Step 7: Reconnect the water line to the new tank. Make sure all connections are tight before proceeding further.

Step 8: Replace the front panel and secure the two screws.

Step 9: Plug the appliance back into the power source and turn it on. Your Bosch 00704137 Coffee Maker should now be ready to use with its new water tank.

Congratulations, you have successfully replaced the Bosch 00704137 Coffee Maker Water Tank!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.