00429065 Bosch Oven Foot
The Bosch 00429065 Foot Switch is an ideal choice for powering on and off your power tools. This heavy-duty foot switch allows you to control your tools with a single press of your foot, eliminating the need to reach for repetitively used buttons. Its robust construction ensures that it will stand up to the toughest jobsite conditions. Its non-skid base adds stability while in use, and its integrated strain relief helps protect your equipment from physical damage. It's compatible with up to 15A current, making it perfect for a variety of projects. Whether you’re drilling, sawing, sanding or polishing, this foot switch is a great addition to your tool arsenal. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0665 lbs
Dimension : 3.1889 x 2.0472 x 1.4173
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Bosch 00429065 Foot Switch is an ideal choice for powering on and off your power tools. This heavy-duty foot switch allows you to control your tools with a single press of your foot, eliminating the need to reach for repetitively used buttons. Its robust construction ensures that it will stand up to the toughest jobsite conditions. Its non-skid base adds stability while in use, and its integrated strain relief helps protect your equipment from physical damage. It's compatible with up to 15A current, making it perfect for a variety of projects. Whether you’re drilling, sawing, sanding or polishing, this foot switch is a great addition to your tool arsenal. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0665 lbs
Dimension : 3.1889 x 2.0472 x 1.4173
Write Your Own Review
The following parts are replaced by this product
- 422023
- 429065
Replacing the Bosch 00429065 Foot Switch
1. Gather all of the necessary tools that you will need; these include a Phillips head screwdriver, adjustable pliers, a ruler or measuring tape, and safety gear including work gloves and eye protection.
2. Unplug the existing foot switch - make sure the power to the device is completely disconnected before beginning this step.
3. Remove the cover from the existing foot switch to reveal the wiring inside.
4. Disconnect the wiring from the terminals for the old foot switch. Make sure to take note of how the wires were connected to the old switch so that you can connect them to the new one in the same way.
5. Measure the dimensions of the old foot switch and compare them to the new one to make sure they are compatible.
6. Install the new foot switch into the device enclosure, ensuring it is turned the correct way so the terminals line up with the wiring.
7. Secure the new foot switch using the screws from the old switch if possible, or the screws that came with the new switch.
8. Carefully reattach the wires to the terminals, double-checking your connections to make sure everything is in the right place.
9. Replace the cover on the foot switch and plug the device back in.
10. Test the foot switch to make sure that it is functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Gather all of the necessary tools that you will need; these include a Phillips head screwdriver, adjustable pliers, a ruler or measuring tape, and safety gear including work gloves and eye protection.
2. Unplug the existing foot switch - make sure the power to the device is completely disconnected before beginning this step.
3. Remove the cover from the existing foot switch to reveal the wiring inside.
4. Disconnect the wiring from the terminals for the old foot switch. Make sure to take note of how the wires were connected to the old switch so that you can connect them to the new one in the same way.
5. Measure the dimensions of the old foot switch and compare them to the new one to make sure they are compatible.
6. Install the new foot switch into the device enclosure, ensuring it is turned the correct way so the terminals line up with the wiring.
7. Secure the new foot switch using the screws from the old switch if possible, or the screws that came with the new switch.
8. Carefully reattach the wires to the terminals, double-checking your connections to make sure everything is in the right place.
9. Replace the cover on the foot switch and plug the device back in.
10. Test the foot switch to make sure that it is functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
