910872 Bertazzoni Range LP Conversion Kit

Step 1: Unplug the electrical power cord from the 910872 Bertazzoni Range and shut off the gas supply.

Step 2: Remove the two screws at the bottom of the oven door, and then remove the door.

Step 3: Open the oven cavity and locate the LP Conversion Kit.

Step 4: Carefully disconnect the electrical wires from the kit and the range.

Step 5: Carefully unscrew the LP Conversion Kit from the range and remove it.

Step 6: Replace the kit with a new LP Conversion Kit.

Step 7: Connect the electrical wires to the new LP Conversion Kit and the range.

Step 8: Securely screw in the LP Conversion Kit to the range.

Step 9: Close the oven cavity and then put the oven door back on.

Step 10: Secure the oven door using the two screws that were removed earlier.

Step 11: Turn on the gas supply and plug the power cord back into the range.

Step 12: Test the range for correct operation.

Following these steps should help you replace the 910872 Bertazzoni Range LP Conversion Kit successfully.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.