608047 Bertazzoni Small Warning Light

DIY Instructions on Replacing a 608047 Bertazzoni Range Small Warning Light

Replacing the 608047 Bertazzoni range small warning light is a task that can be completed in a few easy steps. Follow these instructions to replace the light and have your range back to full working order in no time:

1. Turn off all power to the range. Unplug the range or turn off the power at the circuit breaker box.

2. Remove the screws attaching the access panel to the back of the range.

3. Once you have removed the access panel, locate the warning light. It is usually placed near the center of the back panel.

4. Use a screwdriver to remove the screws holding the light in place.

5. Pull the old warning light out of its socket and discard it.

6. Place the new warning light into the socket and secure it with the screws.

7. Turn the power back on and test the new warning light.

8. Replace the access panel and secure it with the screws.

Your replacement of the Bertazzoni range small warning light is now complete. If the light does not work, double check your connections and make sure that the power has been turned back on. Remember to always take extra precautions when working around electrical appliances.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.