504187 Bertazzoni Dual Burner Cover

Replacing the 504187 Bertazzoni Dual Burner Cover

DIY instructions for replacing the 504187 Bertazzoni Dual Burner Cover:

1. Begin by disconnecting the power to the cooktop. If the cooktop has a plug and cord, unplug it from the wall outlet. If the cooktop is hard wired, switch off the breaker or remove the fuse that supplies power to the appliance.

2. Lift up the front and back of the cooktop to access the burner cover. With your hands, gently lift the front and back of the cooktop to access the screws that secure the 504187 Bertazzoni Dual Burner Cover.

3. Remove the screws that secure the cover. Once the screws are removed, you will be able to access the 504187 Bertazzoni Dual Burner Cover.

4. Carefully remove the old burner cover. Unhook the old 504187 Bertazzoni Dual Burner Cover from the connecting clips or wires as needed.

5. Place the new burner cover. Securely attach the new 504187 Bertazzoni Dual Burner Cover to the connecting clips or wires. Make sure all connections are secure before moving on to the next step.

6. Tighten the screws that secure the new burner cover. After securing the new 504187 Bertazzoni Dual Burner Cover, use a screwdriver to tighten the screws.

7. Lower the cooktop. The installation of the new 504187 Bertazzoni Dual Burner Cover is now complete. Reattach the cooktop bottom and lower the cooktop into place.

8. Restore the power supply. Restore the power to the cooktop, either by plugging the cord into the wall outlet or turning on the breaker or replacing the fuse.

Your 504187 Bertazzoni Dual Burner Cover replacement is now complete. Enjoy your new burner cover!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.