504129 Bertazzoni Medium Flame Spreader

DIY Instructions for Replacing the 504129 Bertazzoni Medium Flame Spreader

1. Unplug the stove from the power outlet.

2. Pull out the drawer at the bottom of the stove, if applicable.

3. Use a Phillips head screwdriver to remove the screws that hold the burner grates and the flame spreader in place.

4. Slip the flame spreader off the burner head by simply pulling it away.

5. Take out the new504129 Bertazzoni Medium Flame Spreader and align it onto the burner head.

6. Secure the flame spreader with the screws, using the same Phillips head screwdriver you used to remove the old part.

7. Plug the stove back into the power outlet.

8. Test the burner to make sure that the flame is evenly spread over the entire surface of the flame spreader.

Following these steps will help ensure that you have replaced the 504129 Bertazzoni Medium Flame Spreader properly and safely.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.